6 modules - PI-VR GmbH

7 MATERIALS REFERENCE» Reflectivity: Sets the material’s reflectivity intensity.» Diffuse Texture» Use Marking: Loads an image texture to be applied to the tire’s sides for thediffuse color channel. The image will be used as a pattern on the surface’ssides.» Use Profile: Loads an image texture to be applied as the tire’s profile for thediffuse color channel. The image will be used as a pattern on the surface’smiddle.» Input Gamma: Sets the texture image gamma correction.» Use ICC Profile: If turned on, the texture’s colors will be interpreted based onan embedded color profile if present. If a color profile is missing, it is assumedthat the colors are stored in sRGB.» Glossy Texture» Use Marking: Loads an image texture to be applied to the tire’s sides for theglossy channel. The image will be used as a glossy pattern on the surface’ssides.» Use Profile: Loads an image texture which will be applied as the tire’s profilefor the glossy channel. The image will be used as a pattern on the surface´smiddle.» Input Gamma: Sets the texture image gamma correction.» Use ICC Profile: If turned on, the texture’s colors will be interpreted based onan embedded color profile if present. If a color profile is missing, it is assumedthat the colors are stored in sRGB.» Bump Texture242» Use Marking: Loads an image texture to be applied to the tire’s sides for thebump structure. The image will be used as a bump pattern on the surface’ssides.