6 modules - PI-VR GmbH

7.1 Truelight Materials» Use Profile: Loads an image texture which will be applied as the tire’s profilefor the bump structure. The image will be used as a pattern on the surface´smiddle.» Bump Intensity: Sets the bump intensity interpretation of the bump image texture.» Parallax Intensity: Sets the parallax shift interpretation of the bump image texture.» Texture Settings Sets the texture projection position of the used textures.» Rotation Axis: Select the rotation axis.» Center: Sets the brush projection center. To center the projection pivot automatically,select an object and press ”Get From Object”. The selected object’scenter will now be used as projection pivot.» Repeat Profile U/V: Sets the U and v repetition of the profile texture.» Scale Markings: Sets the texture’s scale value for the marking texture.» Blend Position: Sets the marking and profile texture blendposition.» Anisotropy: Sets the texture filter quality for the image texture. Value 1 islowest quality. Value 16 is highest quality.For further information on the Displacement, Raytracing, Incandescence, Commonand Transparency settings please refer to the ”General Truelight Material Settings”section at the beginning of the chapter.243