6 modules - PI-VR GmbH

6 MODULES• Viewpoint: Export all the viewpoints in the scene to an .xml file.• Selected: Export the seleced objects to an .xml file.» Camera Settings88» General:• Projection Mode: This menu sets up the projection mode of the projectionmatrix for the selected camera.· Perspective: In the perspective mode, the current scene is rendered inperspective projection view. This mode is the most natural way of imagereception.· Orthographic: In the orthographic mode, the current scene is renderedin parallel projection view.· Spherical Map, Peters Map, Vertical Cross, Horizontal Cross: Rendersthe current scene with a 360 ◦ environment projection. To use one ofthese modes, create a new Perspective Camera, activate it and choosethe desired projection mode. Please note that these projection modesonly take effect when raytracing is activated.• Wireframe: Renders the selected camera view in wireframe mode.• Depth of Field: Activates or deactivates the depth of field function. Withactivated depth of field you have access to the FStop settings in the LensAttributes.• Motion Blur: Activates or deactivates motion blur. With activated motionblur you have access to the shutter settings in the Lens Attributes.• Position: Sets the 3D coordinates for the camera position.• Roll: Sets the roll angle for the current camera.• Field of View: Sets the field of view angle of the camera, measured indegrees. You can switch between horizontally and vertically defined FOVvia Lens Attributes » Field of View Mode. The Field of View parameter isdirectly connected to the focal length parameter.