RENTAL SOLUTIONS GUIDE 2007 - TR Corporation
RENTAL SOLUTIONS GUIDE 2007 - TR Corporation
RENTAL SOLUTIONS GUIDE 2007 - TR Corporation
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
NON-DES<strong>TR</strong>UCTIVE TESTING<br />
92<br />
nOn-deStructive teSting<br />
Mitutoyo 293-330 Digital Micrometer<br />
MIT,293-330 AU<br />
Water resistant and coolant proof (IP65) digimatic micrometer, measuring<br />
range 0~1”, 0~25mm. Resolution .00005”, 0.001mm , quantizing error<br />
±1 count, LCD display. Temperature operating range 5~40OC, storage -<br />
10~60OC. button settings: origin, zero/AbS, inch/mm, hold.<br />
Panametrics 26 mg Pocket Thickness Gauge<br />
pAN,26MG AU/NZ<br />
Range 1~500mm, fast min mode. Resolution 0.01mm. probe operates -<br />
20~150OC. Panametrics NDT 37DL-Plus Ultrasonic Thickness Gauge<br />
pAN,37DL-pLUS AU<br />
Thickness gauge with large display (A-scan), which will display the returned<br />
waveform. It has echo-echo through-paint capability. Supplied with WIN37DL<br />
pLUS software and cable. The supplied probe is 11 mm diameter with a<br />
1~500 mm operating range and a -20~500OC temperature operating range.<br />
The instrument has a MIL-STD-810E hazardous area operation.<br />
cOncrete teSting equipment<br />
ELE Type EL35-2020 Concrete Cover Meter<br />
ELE,EL35-2020 AU/NZ<br />
Non-destructive measurement of concrete thickness above steel<br />
reinforcement rods. Measures rod diameter. Depth range 360mm for rod<br />
diameters 6~40mm & 200mm depth for rod up to 6mmØ. Small search<br />
head 80H x 50mmØ. provides a high resolution capability when mapping<br />
out reinforcement structures. Range 100mm with 6mm bar to 120mm with<br />
40mm bar. battery operated.<br />
Profometer-4 Rebar Locator<br />
pRO,pROFO-4 MY<br />
Rebar locator.<br />
Steinkamp BP7 Ultrasonic Concrete Tester<br />
STE,bp7 AU<br />
Measures the time a signal takes to propagate through a material. Used for<br />
concrete refractory bricks, tile (fired and unfired), outcropping rocks, tunnel<br />
walls, frozen ground, electrolytic carbon, plastics, adhesion, cast iron and<br />
wood etc. Technique relies on the fact that the pulse velocity relates to the<br />
materials tensile strength. Instrument can be used to determine % steel in<br />
concrete, variations in the moisture content, measurements of crack depth,<br />
voids, etc.<br />
Panametrics 36DL Plus Thickness Gauge<br />
pAN,36DLpLUS AU<br />
Large display (A-scan), which displays the returned waveform. Echoecho<br />
through-paint capability. Supplied with WIN95 software and cable.<br />
Supplied probe is 11mmØ with 1~500mm operating range and -20~500OC temperature operating range. Instrument has a MIL-STD-810E hazardous<br />
area operation.<br />
Panametrics 25DLHP Thickness Gauge<br />
pAN,25DLHp AU<br />
Designed for fiberglass, rubber composites and castings. Measures<br />
standard steel, copper, etc. Does echo-echo measurements. Measures<br />
the thickness of material under paint, etc. built in 5,000 reading datalogger<br />
and an RS232 port.<br />
Krautkramer DMS Thickness Gauge<br />
KRA,DMS AU<br />
Complete with echo verification and logger. Includes high temperature probe<br />
and cable. Incorporates a wave form display for accurate assessment of<br />
material under test, measurement of thickness whilst ignoring external paint.<br />
probe will operate to 200OC without cooling, up to 540OC with cooling.<br />
Measurement ranges 0.75mm~250mm (for different ranges other probes<br />
are available). Resolution 0.01mm. Stores up to 80,000 readings or 1,200<br />
readings with full waveform information.<br />
Sonatest Thickness Gauge<br />
SON,T-GAGE-IV+ AU/MY<br />
Range 0.63~500mm, resolution 0.01mm, high speed scanning mode,<br />
selectable backlight, alarm mode, differential mode, RS232C output,<br />
data send using hyper terminal. Supplied with high temperature probe,<br />
temperature range 0~340ºC.<br />
Protimeter SM Moisture Meter<br />
pRO,SM AU<br />
Moisture meter for survey work. Very good for determining wet points. Can<br />
be used on both concrete and timber. Subsequent accurate measurements<br />
can then be made.<br />
Proceq LR Concrete Test Hammer<br />
pRO,LR AU<br />
Concrete hardness tester (Schmidt hammer). Supplied with in-built<br />
mechanical chart recorder. Impact energy 0.735Nm, 0.075kgm. For concrete<br />
thickness less than 100mm.<br />
Protimeter CMIII Concrete Moisture Meter<br />
pRO,CMIII AU<br />
Measures concrete moisture content using 2 methods. Firstly using<br />
impedance as a direct instant method. Secondly an accurate method<br />
requiring placing a box on the concrete and measuring the humidity<br />
generated by the concrete.