RENTAL SOLUTIONS GUIDE 2007 - TR Corporation

TSI 8704 DPCALC Micro Manometer
TSI,8704 AU
Measures differential pressure, velocity, average, volumetric flow, max & min.
With static pressure calculations, density correction and K factor. Pressure
range -1245~3735pa. Velocity range 1.25~78.5m/s. Extendable pitot tube
20~980mm. Datalogging 500 point with RS232C interface and software.
DPM TT370S Digital Manometer
DPM,TT370S NZ
Digital micromanometer with an extendable pitot tube kit. Dp ranges are
199.9pa, 1,999pa & 7kpa. Velocity range with pitot kit is 1.2~100m/s. Dp
accuracy is 1% of reading +2 counts. Recorder output of 1mV per count.
DPM TT570CL Digital Manometer NATA Certification
DpM,TT570CL-NATA NZ
Digital micromanometer with an extendable pitot tube kit. Dp ranges are
199.9pa, 1,999pa & 7kpa. Velocity range with pitot kit is 1.2~100m/s.
Dp accuracy is 1% of reading +2 counts. built-in data logger holds 1,400
readings.
Druck DP1705 Manometer 0~20 kPa
DRU,DpI705 AU
Handheld digital manometer range 0~20kpa, accuracy 0.2 %. Displays all
common engineering units.
Shortridge ADM-860 Electronic Manometer
SHO,ADM-860 AU/MY
Electronic micro manometer for air balance and similar applications.
Measures differential pressure, air velocity and temperature. Differential
pressure range 0.0025~1,500mm wg. Velocity range 7.5~3,000m/min
(750m/min with velgrid). Memory 100 point with sum and average.
Accessories include pitot tube and 16 point velgrid for face velocity work
including exhaust hoods, clean room outlets, and large filters or coils.
Airflow 36 Pitot Tube
AIR,pITOT-36 AU
pitot tube (36”) for use with manometers and micro manometers.
Kurz 2443 Air Velocity Meter
KUR,2443-24 AU
portable air velocity meter and flow-computer. Working velocity range
0~12,000 sf/m (60m/s) at pressures to approx 10bar (probe rated to 20bar).
Temperature range -40~200OC with compensation. Selectable English
or metric units for velocity or mass-flow. Thermal sensor probe 9.5mmØ
x 330mm long with sensor-shield. Compression fitting and nylon ferrules
for probe removal or position adjustment in tapped pipe. Suitable for use
in ducts or pipes, min pipe 50mmØ approx. Calibrated for air and suitable
for use with other non-hazardous gases. Recording of up to 1,500 data sets
with time and date. Two analog 4~20mA outputs, and RS232C serial port for
configuration upload and data download. Rechargeable NiMH batteries.
TSI 8370 Accubalance Balometer
TSI,8370 MY
balometer including 5-hood kit and hard case. Flow range 15~1,000 litres/
sec (50 to 3,500m3/hr) accuracy +/-5%, reading +/- 2.4 l/s (8.5m3/hr).
Operating temp range 0-60OC. Weight (610 x 610mm hood) 3.4 kg hood
provided 610 x610mm (standard), 610 x 1220mm, 305 x 1220mm, 305 x
1525mm and 915 x 915mm.
AUSTRALIA
1800 632 652
www.techrentals.com.au
NEW ZEALAND
0800 832 473
www.techrentals.co.nz
air flOW meaSurement/air quality
TSI 8371 Accubalance Balometer
TSI,8371 NZ
Airflow hood 610 x 610mm. Measures air volume flowing through registers,
diffusers, and grilles. Range is 15~1,000l/s, accuracy is ±5%. Temperature
range is 0~60ºC. Sample and hold function displays reading of one sample.
Automatic conversion between actual and standard flows when user initially
inputs temperature and barometric pressure, variable time constant modes
available for a steady display when measuring fluctuating flows, K factor
function enables flexibility for measuring a variety of diffusers, back-lit display
is easy to read in poor lighting conditions.
TSI 8373 Balometer With Logging
TSI,8373 AU
Flow range 15~1,000L/s (50~3,500m3 /hr); accuracy ±5% [to ±2.4L/s].
Operating temperature range 0~60OC. Includes 5 hood kit & hard case.
Hoods provided 610 x 610mm (standard), 610 x 1,220mm, 305 x 1,220mm,
305 x 1,525mm & 915 x 915mm.
TSI 8375 Accubalance Modular Air Balancing
TSI,8375 (NZ)
Balometer with detachable micromanometer for air balancing applications.
610 x 610mm air capture hood for measurements in the range 42~4,250m3/
h with automatic compensation for barometric pressure and air temperature,
450mm pitot probe (range 0.13~41m/s), 16-point velocity matrix probe
(0.13~13m/s) and static pressure probes (differential pressure range
±3,735pa with safe limit 37kpa, absolute pressure range 47~135kpa).
Accuracy typically 2% for pressure, 3% for flow. Large, multi-line backlit
LCD display for single or statistical readings with min, max and average of
up to 1,000 values of each measured parameter. Manual result storage or
automatic data logging up to 1,000 time/date stamped readings. RS232 port
for data transfer to pC or serial printer, with cable and “LogDat” download
software. Rechargeable with approx 12h operation, or ac adaptor.
Shortridge CFM88-3 Electronic Balometer
SHO,CFM88-3 AU
Measures supply and exhaust flow in cfm and l/sec. Ranges 25~2500cfm
supply and 25~1500cfm exhaust. Compensated for air density and back
pressure. Hood sizes 600 x 600mm, 600 x 1,200mm & 300 x 1,200mm.
Airflow AV2 100mmØ Anemometer with Volume display
AIR,AV2 AU/NZ
Vane anemometer with 900mm (35”) telescopic probe extension. Velocity
measurement range 0.25~30m/s (50~6,000ft/min). Averaging mode
available. Volume display based on duct or other area. Head operating
range -10~70OC (lower limit of -30CC for short periods). Output 0~1V.
Airflow AV2 100mmØ Anemometer NATA Certification
AIR,AV2-NATA AU
Specification as above but with NATA certification.
Airflow AV6 100mmØ Anemometer with Volume
AIR,AV6 NZ
Vane anemometer 100mmØ with articulating extension handle. Measures
velocity, volume flow and temperature. Vane head operating range is -
10~70ºC, -30 possible for short periods. Accuracy is ±1% of reading +1
digit. Resolution is 0.01 m/sec. Velocity range is 0.25~30m/s. RS-232C
interface for data logging & real time data retrieval. Stores up to 99 readings
of velocity & temperature. Analogue output of 0~1v.
Schilknecht Mini Air 2 Vane Anemometer
SCH,MINI-2 AU
probe 22mmØ. Range 0.3~40m/s. Min, max & time averaging functions
with 0~1V analog output.
AIR CONDITIONING & AIR QUALITY - HVAC & IAQ
MALAYSIA
603 5632 1135
www.techrentals.com.my 115