RENTAL SOLUTIONS GUIDE 2007 - TR Corporation

Fluke 700 Pxx Series Pressure Modules
FLU,700pxx NZ
Assortment of pxx series pressure modules for the Fluke 741/744 process
calibrators.
Druck DBC150TC Dry Well Calibrator Calibrator
DRU,DbC150TC AU
Temperature range -45(below ambient)~150ºC. Accuracy 0.3ºC, resolution
0.01ºC, stability 0.03ºC. Well standard insert supplied 145mm deep, 5, 6.6
& 9.8mmØ. Heating time 14min 20~120ºC, cooling time 22min 25~-20ºC.
Calibrator also measures sensor outputs, it can measure 5 types of RTD
& 11 types of thermocouple. Supports 2, 3, 4 wire RTD and provides cold
junction compensation for thermocouples.
Hart 9105 Dry Block Temperature Calibrator -25~140ºC NATA
HAR,9105-NATA AU
HAR,9105 MY
Range -25~140ºC, accuracy 0.1, resolution 0.01, stability 0.02. RS232
interface for ramp and soak programming. Well dimensions 150mm deep,
19, 5, 3 & (2x) 6mmØ. Heats and cools in less than 10min. NATA certified.
Hart 9107 Dry Block Temperature Calibrator -45~140ºC NATA
HAR,9107-NATA AU
Range -45~140ºC, accuracy 0.1, resolution 0.01, stability 0.02. RS232
interface for ramp and soak programming. Well dimensions 150mm deep,
19, 5, 3 & (2x) 6mmØ. Heats and cools in less than 10min. NATA certified.
> NEW Hart 9170-R Metrology Well Calibrator with Built-in
Reference & NATA Certification
HAR,9170-R-NATA AU
Temperature range -45~140ºC with bult in reference thermometry. Reference
input accepts (not supplied) 100, 25 and 10ohm pRT’s. Display accuracy +/-
0.1ºC, stability +/-0.005ºC full range, resolution 0.001ºC. Well depth 6.3”,
insert type A 1/4, 3/16, 1/4, 1/8, 1/4, 3/8”. Large LCD, numeric keypad and
on screen menus. Heating time 32min 23~140ºC, 45 minutes -45~140ºC,
cooling time 44min 23~-45ºC, 19min 140~23ºC. Supplied with RS232C
interface and CD-ROM software.
Hart 9100-A Dry Block Temperature Calibrator 30~300OC
HAR,9100-A NZ
Stability is 0.2ºC @ 50OC & 0.3ºC @ 300ºC. Accuracy for 35~200ºC ±0.5
for 200~300ºC ±1, for well holes greater than ¼” ±2ºC.
AUSTRALIA
1800 632 652
www.techrentals.com.au
NEW ZEALAND
0800 832 473
www.techrentals.co.nz
induStrial calibratOrS
> NEW Hart 3125 Surface Probe Calibrator 35~400ºC NATA
Certification
HAR,3125-NATA AU
Temperature range 35~400ºC. Display accuracy ±0.5~200ºC, ±1~400ºC.
Stability ±0.2~300ºC, ±0.3~400ºC. Resolution 0.01º. Heating time
25~400ºC 22min. Cooling time 400~100ºC 65min. Temperature surface
plate 3.8ӯ accessible.
Hart 9141 Dry Block Temperature Calibrator 50~650ºC
HAR,9141-NATA AU
Range 50~650ºC, basic accuracy 0.5% (holes > ¼” 2ºC). Insert hole sizes
1/16”, 1/8”, 3/16”, ¼”, 3/8” & ½”. Includes pC software and interface cable.
Heating time 1min to 650ºC. Cooling 25min from 650ºC~100ºC. Well depth
4.875”. Stabilization time 7min.
Hart 9150 Furnace 150-1200ºC
HAR,9150 AU
Temperature range 150~1200ºC. Stability ±0.5ºC, display accuracy of ±5ºC
across entire range. Display resolution 0.1º~999.9ºC, 1º above 1,000ºC.
Well diameter 1.25”, well depth 5.5”, insert type A. 1/16”, ¼”, ⅜”, 3/16”, ⅛”,
½”. Heating time 35min to 1,200ºC, cooling time 140min.
Jofra 1200SE Precision Temperature Calibrator
JOF,1200SE MY
Lightweight, portable for lab and general use. Simple single step zero setting.
Temperature range 300~1200ºC. Excellent performance characteristics.
Accuracy +2ºC. Stability +0.5ºC. Display in ºC or ºF to 0.1 resolution. Fast
cooling and heating. User-selectable slope rates for controlled thermo switch
testing. Self diagnostics includes semi-auto Switch Test & Hysteresis Test.
Grant W6 Temperature Bath NATA Certified
GRA,W6-NATA AU
Water/oil bath calibrator for calibrating temperature probes. Ranges water
ambient 100ºC; silicon oil ambient; 150ºC. Requires 3L oil (not supplied).
Digital temperature controller and display. Stability 0.004ºC. Uniformity
0.01ºC. Display resolution 0.1ºC. Tank size 300w x 150d x 150hmm.
GENERAL INDUSTRIAL EQUIPMENT
MALAYSIA
603 5632 1135
www.techrentals.com.my 97