RENTAL SOLUTIONS GUIDE 2007 - TR Corporation

Voltech PM3000A 3 Phase Power Analyser
VOL,pM3000A AU
Capable of making measurements of all standard electrical characteristics
of 1 & 3 phase supplies. Measures inrush current and crest factor, load
impedance and harmonic analysis, energy and max demand, extendable
using current and potential transformers. Frequency range dc~500kHz.
parameters W, VA, Var, V, A, pF, peak voltage and current, crest factor,
impedance, peak inrush current, voltage and current harmonics, 99th order,
THD, Hz, Wh, VAh, Varh, Amph, average pf. Input coupling may be ac or ac
+ dc. Outputs printer, recorders (8), and oscilloscopes. IEEE, RS232C, and
centronics interfaces and waveform output derived from current and voltage
inputs are included. Accuracy V & A 0.05%, power 0.1%. Input ranges
voltage 0.5V~1kV rms, current 0.05~30A rms (200A peak). Accessories
3 x 1kA clamp-on CTs, and 3 x precision 100A/1kA dual range current
transformers 0.2% (not clamp on).
Voltech PM3000A with NATA Calibration
VOL,pM3000A-NATA AU
Specifications as above but with NATA calibration.
LEM Analyst 2060 Hand-held 1 Phase Clamp-on Power Meter
Analyser
LEM,ANALYST-2060 AU
Measure, record and log W, VA, VAR, kWh, and power factor. Current to
2kA auto-ranging ac or dc. peak, Crest Factor, THD, DF and frequency for
voltage (4~750V) and current. Harmonics to the 25th order. Time base is
selectable from 2ms/div~50ms/div. Large backlit multi parameter display,
with oscilloscope and chart modes. Memory size: 8 screens smart save and
up to 10,000 readings. Jaw opening capacity 60mmØ. Typical battery (6 x
AA alkaline) life 24h without backlight.
LEM Topas 1000 Power Network Analyser
LEM,TOpAS1000 AU
Measures all relevant parameters in one measurement system. Inputs
(isolated) voltage 4 channels, 200mV~1kV, current 4 channels, supplied
with 4 x 0~10A, 10~100A ac clamp-on CTs and 4 x (unit powered) 0~3kA
LEM-Flex current sensors. Can be configured for 8 voltage channels.
Measuring functions rms, V(U) voltage imbalance, positive, negative & zero
phase sequence, phasor (vector) diagrams, amps (I)a, pf, kVA, kVAr, f(Hz),
energy, on-line oscilloscope, power and multimeter, harmonics (by power/
direction, magnitude & phase), inter-harmonics, THD, flicker, transients
(100kHz~10MHz), will capture events from 0.1µs in duration. Software
configured manual or auto trigger levels, ethernet or serial interface, memory
>540Mb/HDD.
LEM Memobox 300 Network Performance Analyser
LEM,MEMObOx300 AU
Weatherproof (Ip65)3ph power analyzer. High accuracy to Class A IEC
61000-4-30. Suitable for 50Hz or 60Hz systems. LEMflex flexible current
probes with ranges 15, 150, 1,500 & 3,000A suitable for conductors up
to 178mmØ. Voltage ranges from 115~830V on 3 or 4-wire systems.
Measures V, A, kW, kVA, kVAR, kWHr, pF, Hz, crest factor, distortion power,
THD, individual harmonics of volts & current up to 50th harmonic, flicker and
ripple control signal levels. Power measurements by either 2 or 3 wattmeter
method. power supply 88~415V either from measurement leads or separate
supply. Memory size 4Mb with 5,700 sampling intervals. Sampling intervals
selectable from 1s~60min. Sample interval of 5min records for >19Days.
Linear or circular (overwrites earliest data once full) memory. Records
average, 10ms min & 10ms max in each interval. Captures motor start
current spikes with corresponding voltage-dips. Captures up to 13,000
voltage sag/surge events 10ms or longer. Weight 1.1kg.
AUSTRALIA
1800 632 652
www.techrentals.com.au
NEW ZEALAND
0800 832 473
www.techrentals.co.nz
pOWer analySerS & recOrderS
LEM Elmes 693 3Ph Power Logger
LEM,603 NZ
Logs, voltage, current & pF. True RMS: VA, VAr, pF, Volts, A & frequency.
Sampling rate is 1s. Statistical measurement interval can be set from
1~60min. Supplied with flexible 1kA Rodowski CTs, 5A clip-on CTs and
software for programming and uploading results. Accuracy, active power
±2%, reactive power ±3%, phase angle ±3%, voltage ±1.5%.
Reliable Power Systems 1600 Analyser
REL,1600 AU
Power analyser for parameter, demand, and disturbance measurement
and long term monitoring. pC required for download - no onboard display.
Complete with 1kA CT’s & 5A CT’s. V & I sampled at 8kHz, min/max values
have 1 cycle response. Impulses sampled at 2 & 4MHz software selectable.
Max input voltage 700V rms. Notebook pC with Win 95 and Office 97
included.
Algodue UPM6001 Power/Demand Analyser
ALG,UpM6001 AU
Includes 3 x 1kA clip-on current transformers. Integral digital display and
printer. Memory 512kb plus RS232 interface for data transfer. Measures
each phase & total V, A, power, pF, VA, VAR. Measures demand over a
defined interval, harmonic distortion, and provides FFT analysis. Records
maxima and minima. Current inputs are at 1V or 5A for external CT’s.
Voltage drop detection for durations exceeding 150ms. Software provides
time plots and remote display of measurement parameters. Higher speed
FFT harmonic plot possible up to 25th harmonic.
Algodue UPM6100 Uni Power Meter 500Hz & Rogowsky 3kA
Options
ALG,UpM6100 AU
power meter 3kA Rogowski current transducer (flexible CTs), 14~500Hz,
harmonic distortion current and voltage 50th order. Large 4Mb memory.
Algodue Ret Set of 3 Rogowski Transducer
ALG,RET
Use with the ALG,UpM6001. Ranges 300A/3kA. powered from analyser.
> NEW Hioki 3197 Power Quality Analyser with 3x1000A
Clamp-on CTs
HIO,3197pQA AU
Monitors inrush current, voltage swell, voltage dips, transient over-voltage
and interruptions. Measure and records power and power factor, active/
reactive energy, demand, load changes (with graph display), voltage and
current. Measures impulsive voltage quality. RMS voltage quality, voltage
swell, voltage dips & voltage interruption. Power quality, frequency, voltage,
current, current peak, active/reactive/apparent power & power factor
(displaced power factor). Three phase quality, voltage unbalance ratio,
current unbalance ratio, harmonic quality (up to 50th order). Harmonic,
voltage, current, ower, voltage/current phase angle. Total harmonic, voltage
distortion, current distortion (THD-F, THD-R).
ELECTRICAL POWER
MALAYSIA
603 5632 1135
www.techrentals.com.my 53