RENTAL SOLUTIONS GUIDE 2007 - TR Corporation
RENTAL SOLUTIONS GUIDE 2007 - TR Corporation
RENTAL SOLUTIONS GUIDE 2007 - TR Corporation
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Hioki 8842 16 Analogue, 16 Logic Channel Waveform Recorder<br />
HIO,8842 AU<br />
Memory 12 bits x 16 megawords/ch for 2 analogue ch, to 2 megawords/ch<br />
for 16 ch. Analogue input channel ranges 10mV~50V per div, 10x div, 400V<br />
dc, 240V ac rms max. In-built FDD, type III pCMCIA card slot (for flashcard<br />
& HDD up to 520Mb). Sampling rate of 1MHz max. Functions memory, real<br />
time record, rms, real time/memory, x-Y memory. Trigger functions level,<br />
window in, window out, voltage drop, rms level, cycle, logic pattern trigger<br />
1,0 or x (disregard). When using logic channels, logic probes must be rented<br />
seperately. Measurement range 400V dc, 240V rms, low pass filters 5Hz,<br />
500Hz, 5kHz, or 100kHz, input coupling dc, GND, ac. Large 10.4” colour<br />
TFT display for settings and waveform display, wide thermal printer fitted.<br />
On screen help function. All settings and waveforms can be saved to media,<br />
waveforms can be saved as binary, text or bmp files.<br />
Hioki 9335 Wave Process Software<br />
HIO,9935 AU<br />
Waveform Processor software, displays, converts to CSV, calculates and<br />
prints waveforms with a pC. Review stored binary files from Hioki 8835,<br />
8835-01, 8841 and 8842 memory recorders. Only way stored binary files<br />
can be viewed on a PC without having to re save them with memory recorder<br />
as Text files.<br />
Hioki 9305 Trigger Cord for Hioki Memory Recorders<br />
HIO,9305 AU<br />
Plug each end of cable 3.5mm. Trigger cord enables master slaving of the<br />
Hioki 8835, 8810 and 8811 memory recorders. One end connected to the<br />
trigger output socket of master recorder the other end connects to the trigger<br />
input socket of the second recorder which is the slave. Trigger pattern set up<br />
for the master and the slave recorder set just to external trigger.<br />
Hioki 4 Channel Digital Probe for use with HIO,8835<br />
HIO,9306 AU<br />
Contact interface for HIO, 8811, 8835, 8835-01, 8841 & 8842 memory<br />
recorders. Threshold digital >1.4V maximum input 50V. Contact closure<br />
input, 2kΩ input resistance 30V allowable input. Response time 2µs.<br />
Hioki 9320 4 Channel Contact & Digital Logic Probe<br />
HIO,9320 AU<br />
For HIO, 8811, 8835, 8835-01, 8841 & 8842 memory recorders, 4 channels<br />
per probe, max of 4 probes per recorder. Use in conjunction with 9321 line<br />
logic probe. Threshold digital selectable 1.4V, 2.5V & 4V. Response time<br />
500ns max. Relay dry contact detection. Max allowable input 50Vdc.<br />
AUS<strong>TR</strong>ALIA<br />
1800 632 652<br />
www.techrentals.com.au<br />
NEW ZEALAND<br />
0800 832 473<br />
www.techrentals.co.nz<br />
memOry recOrderS<br />
Hioki 9321 Line Logic Probe<br />
HIO,9321 AU<br />
Four channels (insulated) per probe. Detection of 60~150Vac, 170~250Vac,<br />
20~150Vdc & 70~250Vdc in 2 ranges. Response time slope rise 1ms, fall<br />
3ms. Max input low range 150V rms, high range 250V rms. Max rated<br />
voltage to earth 250V rms. Connector cable 1.5m. Probe tip cable 1m.<br />
Hioki Kit of Three 9322 High Voltage True rms Interface<br />
HIO,9322-KIT AU<br />
Used with many memory recorders, eg. Hioki 8835. Operating modes 3. DC<br />
mode for waveform monitor output dc to 3MHz, ac mode detection of power<br />
surge noise 1 kHz~10MHz. Rectified true rms output of dc & ac voltages.<br />
40Hz~100kHz response speed 200ms or less. Max voltage dc 2kV, ac 1kV<br />
CATII, ac/dc 600V CATIII, balanced differential input 1/1,000 divider.<br />
Hioki 520Mb PCMCIA Hard Disk for HIO,8835 & 8841<br />
HIO,8835-HD520 AU<br />
Data can be stored as mem file which is binary, data can be replayed on<br />
recorder, txt file which is text so as data can be read using excel, bmp file so<br />
screen dump can be saved for import to word document, single or dual FFT<br />
binary file for playback on recorder. File can be saved as setting file, useful<br />
for customers who rent the memory recorder for same applications again.<br />
Transfer files to a PC and reload next time recorder is rented, saves time<br />
in use of recorders. Card can be plugged in to a pCMCIA Type III slot on a<br />
laptop, files can be stored or viewed.<br />
Hioki 9555 Current Sensor<br />
HIO,9555 AU<br />
For HIO,9278 clamp on CT. Output designed for waveform recording and<br />
depends on CT.<br />
Sandisk Compact Flash Card 512MB with PCMCIA Adaptor<br />
COM,FLASH512Mb AU<br />
Compact Flash Card 512Mb typeI with pCMCIA Adaptor.<br />
Hioki 9278 Universal Clamp-on CT<br />
HIO,9278 AU<br />
For use with HIO,9555. Range 0~200A, dc 100kHz, 20mmØ max jaw.<br />
Hioki 9132 Clip-on ac Current Transducer<br />
HIO,9132 AU/NZ<br />
Ranges 20~1kA fs. Short term overload capability 2kA. Output 0.2Vac. For<br />
use with Hioki 8800 series recorders, for current waveform recording.<br />
Hioki 9018-10 500A ac Clamp-On Transducer<br />
HIO,9018-10 AU<br />
Selectable ranges 10~500A. Output voltage 200mVac fs per range selected.<br />
Up to 3kHz frequency response. bNC connection.<br />
Hioki 3270 Sensor with 150A ac/dc Clamp-On Transducer<br />
HIO,3270-9276 AU<br />
Frequency bandwidth dc to 1MHz, rated output 1.5V for fs of range. Clamp<br />
20mmØ. Suitable to view waveforms with memory recorders.<br />
Hioki 9555 Signal Conditioner with 9278 200A ac/dc Clamp-On<br />
Transducer<br />
HIO,9555-9278 AU<br />
Frequency bandwidth dc to 100kHz, rated output 2V for fs of range. Clamp<br />
20mmØ. Suitable to view waveforms with memory recorders.<br />
Hioki 9304 Input Attenuator for 8800 Series Recorders<br />
HIO,9304 AU/NZ<br />
Max input 600Vdc/ac peak.<br />
DATA ACQUISITION & RECORDING<br />
MALAYSIA<br />
603 5632 1135<br />
www.techrentals.com.my 75
Change language