RENTAL SOLUTIONS GUIDE 2007 - TR Corporation

ELECTRICAL POWER
40
magnetic field meterS - gauSS teSla
Model Type Frequency (Hz) Range (G) Electric Field Output
ARL,GM AC magnetic field meter 12~1,300 9.9 ~ 99mG CRO
HOL,HI-3627 Vector AC magnetic field meter 5~2,000 0.2 ~ 20
HOL, HI-3604 AC field strength meter 50~100 0.1 ~ 20,000mG 1~200,000V/meter
TES,70 AC magnetic field meter 30~600 0.1 ~ 1,999mG
HMI,GM04
bEL,4080 Digital gauss meter
40~600 0.1mG ~ 511mG
> NEW
Bell 5180 Gauss/Tesla Meter
bEL,5180 AU
Magnetic measuring equipment, portable gaussmeter. built-in software
eliminates the need for complex calibration procedures. Key features
include Auto Zero, Min./Max./peak Hold, Auto Range and Relative Mode.
Allows the user to select Gauss, Tesla or Ampere/Meter readings. With
Hall effect transverse probe. Frequency bandwidth DC~30kHz, range up to
30kG. Analogue output (±3V FS) and USb interface. battery operated.
Arlyuna LF Milligauss Magnetic Field Strength Meter
ARL,GM NZ
Handheld ac magnetic field strength meter. Ranges 9.9mG & 99mG.
Measurement bandwidth 12Hz~1.3KHz. 60Hz & 50Hz filter and analogue
ac output for connection to oscilloscopes, recorders or loggers.
Bell 4048 ac/dc Gauss Meter
bEL,4048 NZ
Handheld digital ac/dc Gauss/Tesla meter. Ranges are 200~20kGauss with
a resolution of 0.1Gauss or 0.02~2Tesla with a resolution of 10E-6Tesla.
Accuracy is 2% +2 digits. peak hold feature. Supplied with transverse probe
and zero gauss chamber.
Bell 4080 ELF Gaussmeter
bEL,4080 AU
Handheld digital ELF gaussmeter. Resolution 0.1mG. Auto ranging
0.1~511mG. probe: 3 axis technology, maintains accuracy regardless of
orientation. True rms measurement. Typical accuracy error: ±2%, +1 digit.
Frequency response: ±5% 40~600Hz, -3db 25/1,000Hz. Applications
include detecting magnetic field emissions from overhead ac power lines,
video display terminals, office equipment and household appliances. This
unit is not suitable for measuring field strength of “neodymium” or “rare earth”
magnets or any permanent magnets. The frequency response ± 5% 40-
600Hz and -3db 25/1000Hz.
Bell 5080 Gauss/Tesla Meter
bEL,5080 AU
Portable gaussmeter complete with Hall effect transverse probe. Frequency
bandwidth dc - 20kHz, ranges 300G~30kG. Max resolution 0.1G (10µT). Max
and min hold. Analogue output and RS232 interface. battery operated.
dc~10kHz 30 ~ 30,000
bEL,4048 dc~12 200 ~ 20,000
BEL,5080 dc~20kHz 300 ~ 30,000 Analog & RS232
BEL,5180 dc~20kHz 300 ~ 30,000 Analog & USb port
bEL,4090-20 Digital ELF gauss meter 40~400 0.1 ~ 1999mG
Holaday HI-3627 Magnetic Field Meter
HOL,HI-3627 AU
Three orthogonal field sensors. Dynamic range 0.2mG~20G. True rms
detection. Frequency range 5Hz~2kHz with an in-built 30Hz high pass filter.
Meets requirements of the Swedish protocol and the IEEE p-1140 protocol.
Holaday HI-3604 LF E & H Field Monitor
HOL,HI-3604 AU/MY
Low frequency field meter. Designed to evaluate electric and magnetic fields
associated with 50Hz power lines. Frequency range 30~2,000Hz. Measures
magnetic fields from 0.1 milligauss to 20 gauss. Measures electric fields from
1 volt/meter to 200 kilovolts/meter. LCD display. 127 reading data memory.
Meets the interim requirements of the Australian Radiation Laboratory for
normal levels of AC power exposure.
Hirst GM04 Microprocessor Controlled Gaussmeter
HMI,GM04 AU
Facilities: store and recall on 0~99 samples, hold. Analogue peak with
digital storage. Auto and manual ranges. Automatic reading conversion
between different units. (Note 1mT = 10G)
Range 1: 0~to more than 3T resolution 1mT.
Range 2: 0~299.9mT resolution 100µT.
Range 3: 0~29.99mT resolution 10µT.
Range 4: 0~2.999mT resolution 2µT.
Accuracy (at 200C): ± 1%. Frequency range: dc and 15Hz~10kHz.
Functions: dc, dc peak, ac rms, ac rms max, & ac peak. Applications include
measurement of magnetic flux density of magnets and assemblies, electric
motor air gaps and drive actuators.
Hirst Magnetic Instruments GM04 Axial Probe
HMI,GMO4AxIAL pRObE AU
Axial probe for use with HMI,GM04.
Teslatronics 70 milliGauss Meter
TES,70 NZ
Tri-axial ac magnetic field meter. Range is 0.1~1,999mGauss, accuracy is
±1% at 60Hz. Frequency response is 40~400Hz ±10%, 50~300Hz ±5%,
30~600Hz - 3db.
Tri-axial Milligauss Magnetic Field Meter
bEL,4090-20 NZ
Handheld digital ELF gaussmeter. Resolution 0.1mG. Auto ranging,
0.1~1999mG. Resolution 0.1mG in high-sensitivity mode & 1mG resolution
in low-sensitivity mode. probe 3 axis technology, maintains accuracy
regardless of orientation. True rms measurement. Typical accuracy error:
±1% + 1 digit. Frequency response: ±10% 40~400Hz, -3db, 20/2000Hz.
Applications include detecting magnetic field emissions from overhead
ac power lines, video display terminals, office equipment and household
appliances.