RENTAL SOLUTIONS GUIDE 2007 - TR Corporation

FLOW METERS
112
flOW meterS - gaS
Model Type Features Max Flow
SpI,VFM5000-50 Vortex
4 ~ 20mA output
Flow, Pressure, Temperature
HOF,2000 & HOF,38 Turbine flowmeter Totalising recorder outputs
SIE,S100-5
KUR,2443-24
pVL,CLIMA3
TSI,4143-6
TSI,4040-6
Mass-flow thermal
sensor
Thermal mass-flow
insertion meter
Insertion
micro-turbine
Mass-flow thermal
sensor
Mass-flow thermal
sensor
“Dial-A-Gas” for 10 gases
RS232C, Analog outputs
Cold tap fittings, RS232C
Logging, 4 ~ 20mA output
Hot-tap rig
RS232, Pressure transducer
Temp measurement
RS232C, Mains/battery
Temp measurement
RS232C, Mains/battery
ClimaAir 3 Flow Meter for Compressed Air & Gases
pVL,CLIMA3 AU
Portable gas flowmeter for compressed air and other applications. Fitted
with “Combisensor” insertion probe for simultaneous measurement of flow,
pressure and temperature. Measuring ranges flow 0.06~40m/s, pressure
to 15bar, temperature to -20~80ºC. Supplied with valve and adaptor-kit for
hot-tapped pipes approx 25~150mm ID, and fitting-kit for pipes to 450mm.
Flow computer functions include flow correction, volume-calculation, and
data logging for about 15,000 values. With RS232 interface and cable, and
software for data download. Rechargeable with AC adaptor.
Sierra Series 100 Gas Mass-flowmeter 0~5l/min
SIE,S100-5 AU
Smart-Trak mass flowmeter. Digital display of mass flow rate for gases
in the range 0~5l/min. Dial-A-Gas set up for direct readout of flow for 10
different common gases without adjustment or recalibration. Analog and
serial RS232 ports, with software and cable provided for connection to PC.
Portable configuration with case, battery, ac power supply and flexible gas
connection set.
Portable Mass Flowmeter & Calibrator 0~300 SLPM
TSI,4040-6 AU
Thermal mass flowmeter or field calibrator for operation in the range
0~300SLpM (standard litres/min). LCD display for flow, temperature and
pressure . Suitable for flow measurements on clean air, or for calibration
checks on personal sampling pumps. Accuracy ±2%/0.05SLpM [whichever
is greater] for air or oxygen [±3%/0.10SLpM for nitrogen or air-mixtures].
Operating pressure range 50-199kpa absolute [approx 95kpa gauge]. With
HEpA filter, adaptor and tubing. RS232C/analog connector with cables
supplied. AC adaptor or battery operation.
Temp
°C
pipe Ø
mm
600m 3 /h Supplied DN50
~200ACFM
(50mm)
Major
Application
Air under pressure
Saturated steam
38mm or 50mm turbine Gases
5slpm ¼” (at meter) Low – flow gases
12,000sfpm -40~200 50mm~ Gases
40m/s -20~80
0.01~20slpm
0~50
~150mm
(450mm without hot-tap)
In-line 9.5mm
~300slpm In-line 22mm ISO
Compressed air
Clean air flow
Use as calibrator
Clean air flow
Use as calibrator
Portable Mass Flowmeter & Calibrator 0.01~20 SLPM
TSI,4143-6 AU
Thermal mass flowmeter or field calibrator for operation in the range
0.01~20SLpM (standard litres/min). LCD display for flow, temperature and
pressure . For flow measurements on clean air, or for calibration checks on
personal sampling pumps. Accuracy ±2%/0.005SLpM [whichever is greater]
for air or oxygen (±3%/0.010SLpM for nitrogen or air-mixtures). Operating
pressure range 50-199kpa absolute [approx 95kpa gauge]. With HEpA filter,
adaptors and tubing. RS232C/analog connector with cables supplied. AC
adaptor or battery operation.
Hoffer 2000 Gas Flow Meter Indicator
HOF,2000 AU
Flow indicator/totalizer for use with flow transducers. Digital display with
recorder outputs 0~10V, 4~20mA. RS232C interface. Operates from ac
mains. Display of metric units with optional conversion factor.
Hoffer 38mm Gas Flow Turbine/Transducer
HOF,38 AU
38mm MS flared gas flow turbine/transducer for use with HOF,2000.
Volumetric flow rate range 1.75~120 actual cfm - gas type, pressure and
temperature correction may be used for mass flow units such as SCFM,
kg/min or L/s. Supplied with 38mm Table E Flanges. Approach pipe length
380mm, exit pipe length 190mm.
Kurz 2443 Air Velocity Meter
KUR,2443-24 AU
portable air velocity meter and flow-computer. Velocity range 0~12,000sf/min
(60m/s) at pressures to approx 10bar (probe rated to 20bar). Temperature
range -40~200OC with compensation. User selected English or metric units
for velocity or mass-flow. Thermal sensor probe 9.5mmØ & 330mm long
with sensor-shield, with compression fitting and nylon ferrules for probe
removal or position adjustment in tapped pipe. Suitable for use in ducts or
pipes, min pipe 50Ømm. Calibrated for air, and suitable for use with other
non-hazardous gases. Recording of up to 1,500 data sets with time and
date. Two analog 4~20mA outputs, and RS232C serial port for configuration
upload and data download. Rechargeable NiMH batteries.