RENTAL SOLUTIONS GUIDE 2007 - TR Corporation

ELECTRICAL POWER
50
pOWer analySerS & recOrderS
Dranetz-BMI Power Xplorer PX5
DRA,px5 AU/NZ
provides the full range of measurements include V, I, W, VA, VAR, TpF, DpF,
Demand, Energy, Harmonics & Inter-harmonics, THD, Harmonics spectrum
(V, I, W) to the 63rd, Flicker (pst, plt), Crest factor, K factor, transformer derating
etc. Min/Max/Avg values are determined in ½ cycle RMS steps. Asset
comes with ac flexible current clamp DRA-bMI,RR3035A/24, current range
30/300/3,000A ac only. Can be extended to different ranges of measurement
both ac & dc by selecting appropriate current clamps. High-speed transient
capture (1MHz sampling rate) and the full range of arithmetic, vector and
sequence parameters to evaluate distorted and un-balanced loads as
defined in IEEE 1459. Exceeding high/low limits of any active parameter
can trigger logging. Voltage & current disturbances can be triggered by
peak value, wave-shape change & cycle-by-cycle RMS value change. preevent
& post-event waveform capture cycles are user adjustable. Voltage
& current channels can be cross-triggered. Suitable for both ac/dc power
quality measurements. (Universal power Quality Analysers). DRA-bMI,px5
analysers can be used for power quality measurements, current inrush
(cycle-by-cycle current logging), fault recording (cycle-by-cycle voltage
logging), long term monitoring and continuous logging at 1s intervals. Four
differential voltages and current channels can be used independently. DRAbMI,px5
is Class A compliant with IEC Standard 61000-4-30 ‘power Quality
Measurement Methods’ (also AS DR04066), AS61000-4-7 ‘Harmonic &
Inter-harmonic Measurements’ and AS61000-4-15 ‘Flicker-meter’. All data
is collected at 256 samples/cycle/channel.
Dranetz-BMI Power Xplorer PX5-400Hz
DRA,px5-400 AU
Specificaion as above but with 400Hz capability suitable for aviation and
military use.
Dranetz Current Clamp 1 - 30A 48Hz~10kHz
DRA,TR2021 AU
Set of 3 current clamps 1~30A RMS, 48Hz~10kHz. Max conductor size
0.47”. Description as for DRA,pR6035A/36 current clamps above.
Dranetz-BMI Power Guide 4400
DRA,pG4400 AU/NZ
provides the full range of measurements include V, I, W, VA, VAR, TpF, DpF,
demand, energy, harmonics & inter-harmonics, THD, harmonics spectrum
(V, I, W) to the 63rd, flicker (pst, plt), crest factor, K factor, transformer
de-rating etc. Min/max/avg values are determined in ½ cycle RMS steps.
Asset comes with ac flexible current clamp DRA-bMI,RR3035A/24, current
range:- 30/300/3,000A ac only. Can be extended to different ranges of
measurement ac/dc by selecting appropriate current clamps. Has the full
range of arithmetic, vector and sequence parameters to evaluate distorted
and un-balanced loads as defined in IEEE 1459. Exceeding high/low limits
of any active parameter can trigger logging. Voltage & current disturbances
can be triggered by peak value, wave-shape change & cycle-by-cycle RMS
value change. pre-event & post-event waveform capture cycles are user
adjustable. Voltage & current channels can be cross-triggered. Suitable for
both ac/dc power quality measurements.(Universal power Quality Analysers).
DRA-bMI,pG4400 analysers can be used for power quality measurements,
current inrush (cycle-by-cycle current logging), fault recording (cycle-bycycle
voltage logging), long term monitoring and continuous logging at 1s
intervals. Four differential voltages and current channels can also be used
independently. DRA-bMI,pG4400 is Class A compliant with IEC Standard
61000-4-30 ‘power Quality Measurement Methods’ (also AS DR04066),
AS61000-4-7 ‘Harmonic & Inter-harmonic Measurements’ and AS61000-4-
15 ‘Flicker-meter’. All data is collected at 256 samples/cycle/channel.
Dranetz Flexible Current Clamp 60/600/6,000A
DRA,pR6035A/36 AU
Set of 3 flexible current clamps 60/600/6,000A RMS, max conductor
size/length of clamp is 36”. Current clamps are suitable for any of new
Dranetz-bMI Models. DRA-bMI,pG4400 / DRA-bMI,px5 / DRA-bMI,px5-
400. Current clamp/probe is very useful for current measurement through
CT current transformer. CT Ratio can be selected on the new Dranetz-bMI
above-mentioned models.
Dranetz Current Clamp Probe 0~10A RMS
DRA-bMI,TR2510 AU
Set of 3 current clamps 0~10A RMS. Max conductor size 0.47”. Description
as for DRA,pR6035A/36 current clamps above.
Dranetz-BMI, 128 MB Flash Memory Card (Industrial Grade)
DRA,128MbFMC AU/NZ
Suitable for the following Dranetz -bMI Models:- DRA-bMI,px5, DRAbMI,px5-400,
DRA-bMI,pG4400.