Instruction Manuals - Cole-Parmer

Instruction Manual pH 1100/ 210010.3 mV setup mode10.3.1 Entering mV setup mode1. Turn the meter ON. If the meter is not in the mV measurementmode, press EXIT and use >/CAL to select mV. The modeselected will flash. Press ENTER to confirm selection. Theirmeter is now in mV measurement mode.2. Press SETUP to enter the setup mode. The display will flashSetup Mode Activated, Please wait... See Figure 109.3. Press >/CAL to select mV. The mode selected will flash. SeeFigure 110. Press ENTER to enter mV setup mode. You arenow in the mV setup mode.4. The first setup program in mV mode is mV Meas. Alarm: P2.0.See Figure 111. If you want to skip to another program, usethe Δ/MI and ∇/MR keys to scroll to the desired program.5. To exit the setup mode at anytime, press EXIT. The meterreturns to the mV measurement mode.Set up Mode Act ivat edPlease wait . . .Figure 109Set up: mV Met erSel ec t & Pr es s ENTERFigure 110mV Meas. Alarm :P2.0Pr es s ENT. t o Sel ec tFigure 111NOTE: To exit the setup mode at anytime without confirmingchanges, press EXIT. If you have made any changes to anyprograms and press EXIT, these changes will be confirmed. Toreset meter to default factory settings, see setup program MeterReset P4.7 (page 54).37