Instruction Manuals - Cole-Parmer

More documents

Recommendations

Info

<strong>Instruction</strong> Manual pH 1100/ 210010.3.6 mV calibration data reset setup program P2.4Use this program to erase all mV calibration data.1. Enter mV setup mode as described in steps 1-4 in Section10.3.1 Entering mV setup mode (page 37).2. Use Δ/MI key to scroll to program mV Cal Reset: P2.4.See Figure 125.3. Press ENTER to enter program mV Cal Reset: P2.4.4. Press >/CAL key to toggle between mV Reset: Yes and No.The selection will flash. See Figure 126.5. Press ENTER to confirm selection.• If you selected Yes, the screen flashes mV being Reset,Please wait... See Figure 127. The meter then returns tosetup mode.• If you select No, the screen flashes Reset Aborted andthen returns to the setup mode. See Figure 128. This isthe last mV setup program. Press ∇/MR to go to theprevious program. Press Δ/MI to go back to the first mVsetup program. Press EXIT to return to mV measurementmode.mV Cal Reset :P2.4Press ENT. to SelectFigure 125mV Reset: Yes NoSel ec t & Pr es s ENTERmV being ResetPlease wait . . .Reset AbortedFigure 126Figure 127Figure 12842
<strong>Instruction</strong> Manual pH 1100/ 210010.4 Ion setup mode (pH 2100 meter only)10.4.1 Entering ion setup mode1. Turn the meter ON. If the meter is not in ion measurementmode, press EXIT and use >/CAL key to select ion. The modeselected will flash. Press ENTER to confirm selection. Themeter is now in Ion measurement mode.2. Press SETUP to enter the setup mode. The display will flashSetup Mode Activated, Please wait... See Figure 129.3. Use >/CAL key to select ion. See Figure 130. The modeselected will flash. Press ENTER to enter Ion setup mode. Youare now in the Ion setup mode.4. The first setup program in Ion mode is Ion Unit Setup: P3.0.See Figure 131. If you want to skip to another program, usethe Δ/MI and ∇/MR keys to scroll to the desired program.5. To exit the setup mode at anytime, press EXIT. The meterreturns to the ion measurement mode.Set up Mode Ac t i v at edPl e a s e wa i t . . .Figure 129Set up: I on Met erSel ec t & Pr es s ENTERFigure 130I on Unit Set up : P3.0Press ENT. t o SelectFigure 131NOTE: To exit the setup mode at anytime without confirmingchanges, press EXIT. If you have made any changes to anyprograms and press EXIT, these changes will be confirmed. Toreset meter to default factory settings, see setup program MeterReset P4.7 (page 54).10.4.2 Ion unit setup mode P3.0Use this program to select Ion measurement units: ppm, ppt, mg/L,g/L, mmol/L, or mol/L1. Enter ion setup mode as described in above in Section 10.4.1Entering ion setup mode. The first setup mode is Ion UnitSetup: P3.0 See Figure 132.2. Press ENTER to enter program Ion Unit Setup: P3.0. Press>/CAL key to toggle between ppm, ppt, mg/l, g/l, mmol/l ormol/l. The unit selected will flash. See Figure 133.I on Uni t Set up : P3.0Pr es s ENT. t o Sel ec tFigure 132ppm ppt mg/ 1g / l mmo l / l mo l / lFigure 1333. Press ENTER to confirm selection and return to the setupmode. To continue to the next setup program, press Δ/MI. Tocontinue to the previous program press ∇/MR. Press EXIT toreturn to the ion measurement mode.43
Page 1: Instruction ManualpH 1100/ pH 2100B
Page 4 and 5: Instruction Manual pH 1100/ 2100TAB
Page 6 and 7: Instruction Manual pH 1100/ 21001 I
Page 8 and 9: Instruction Manual pH 1100/ 21001.3
Page 10 and 11: Instruction Manual pH 1100/ 21002 S
Page 18 and 19: Instruction Manual pH 1100/ 21004 m
Page 20 and 21: Instruction Manual pH 1100/ 21005 I
Page 26 and 27: Instruction Manual pH 1100/ 21009 T
Page 28 and 29: Instruction Manual pH 1100/ 210010.
Page 36 and 37: Instruction Manual pH 1100/ 2100pH
Page 56 and 57: Instruction Manual pH 1100/ 210012
Page 64: For more information on Eutech Inst

Instruction Manuals - Cole-Parmer

Create successful ePaper yourself

Delete template?

Save as template?