GM862-GPS Software User Guide - SemiconductorStore.com

More documents

Recommendations

Info

GM862-GPS Software User Guide1vv0300729 Rev. 4 - 24/01/072.7.3.2 Hang up the data call• Send command ATH• wait for response NO CARRIERTIP: during the data call the device remains in data (on line) mode, so the escape sequence(+++) must be issued before sending AT commands to the device.2.8 Answer an incoming CallWhen an incoming call is detected the device reports an unsolicited code which may be:Unsolicited codeRING+CRING: VOICE+CRING: ASYNC+CRING: REL ASYNC+CRING: SYNC+CRING: REL SYNC+CRING: FAXReasonThe extended format of incoming call indication isdisabled and a call (voice or data) is incoming.The extended format of incoming call indication isenabled and a voice call is incoming.The extended format of incoming call indication isenabled and an asynchronous transparent data callis incoming.The extended format of incoming call indication isenabled and an asynchronous reliable (nottransparent) data call is incoming.The extended format of incoming call indication isenabled and a synchronous transparent data call isincoming.The extended format of incoming call indication isenabled and a synchronous reliable (nottransparent) data call is incoming.The extended format of incoming call indication isenabled and a fax call is incoming.Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 26 of 111
To answer the call:GM862-GPS Software User Guide1vv0300729 Rev. 4 - 24/01/07• Send command ATA• wait for response:Response Reason ActionCONNECT 9600The incoming call was a DATA exchange data..one and called modem is nowon line.ERRORNo incoming call is found, call call lostmay have been lostNO CARRIERThe incoming call was a DATAone and the modemhandshaking has not beensuccessfulOKThe incoming call was a VOICEcall and is now active.check for mobile registrationand signal strength and modemsettings.proceed aheadTIP: The call is answered with the appropriate type (VOICE or DATA) regardless of the+FCLASS setting active. To distinguish between Data and Voice see the command response orthe extended format incoming call indication.Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 27 of 111
Page 1 and 2: GM862-GPS Software User GuideGM862-
Page 4 and 5: GM862-GPS Software User Guide1vv030
Page 8 and 9: Command Time-Out (Seconds)#SHDN 10#
Page 12 and 13: 2.5.2.3 Provide SIM PIN (only if re
Page 20 and 21: For example:1 - Let's assume that t
Page 30 and 31: +CME ERROR: 17PIN2 is required to c
Page 34 and 35: AT+CPBR=7the response may look like
Page 36 and 37: 3.1.5 Phonebook entry DeleteAs firs
Page 76 and 77:
GM862-GPS Software User Guide1vv030
Page 78 and 79:
Page 80 and 81:
Page 82 and 83:
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
Page 90 and 91:
esponse:+CCLK="02/11/07,13:24:47"OK
Page 92 and 93:
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
5.6.4 GPS PARAMETERS SAVEGM862-GPS
Page 108 and 109:
Page 110 and 111:
show all

GM862-GPS Software User Guide - SemiconductorStore.com

Create successful ePaper yourself

Delete template?

Save as template?