GM862-GPS Software User Guide - SemiconductorStore.com
GM862-GPS Software User Guide - SemiconductorStore.com
GM862-GPS Software User Guide - SemiconductorStore.com
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>GM862</strong>-<strong>GPS</strong> <strong>Software</strong> <strong>User</strong> <strong>Guide</strong>1vv0300729 Rev. 4 - 24/01/073.2.4.6 Barring/Unbarring All Outgoing International Calls except to HomeCountry• Send <strong>com</strong>mand AT+CLCK=OX,,where: is the operation selected:0 – Call Barring Disable (Unbarring)1 – Call Barring Enable (Barring) is the network password required to change facility status• wait for response:Response Reason ActionOKBarring is now enabled/disabled all outgoing international callsexcept to Home Country will bebarred/unbarredERROR some error occurred Enable the extended errorcodes report (see par.2.5.2.1)and retry.+CME ERROR: 4operation not supported, the Check <strong>com</strong>mand syntaxservice required is not available+CME ERROR: 30 no network service Check for registration (see par.2.5.3.1) and signal strength.+CME ERROR: 16 wrong network password check network password andretryFor example:1- Let's assume you want to bar all the outgoing international calls except the ones towards the HomeCountry and the network password of your operator is 1234:<strong>com</strong>mand:AT+CLCK=OX,1,1234response:OKReproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 50 of 111
Change language