GM862-GPS Software User Guide - SemiconductorStore.com

GM862-GPS Software User Guide1vv0300729 Rev. 4 - 24/01/07- Now you might want to look for the entries with the name starting with: "FAUSTO" but no recordcontains this name:command:AT+CPBF="FAUSTO"response:+CME ERROR: 22or if extended error codes are disabled simplyresponse:ERROR3.1.3 Phonebook entry read by IndexAs first thing, you must select the desired storage as active (see par.3.1.1.1). Then:• send command AT+CPBR=where: is the index number of the desired PB record to be read.• wait for response in the format:+CPBR= ,"",,""OKwhere: is the record number on the PB; is the phone number; is the type of number:145 – international numbering scheme129 – national numbering scheme is the alphanumeric name associated with the number.or in the case the index number does not correspond to a written record:+CME ERROR: 22 or simply ERROR.For example:1- Let's assume you want to select the "SM" normal phonebook for operations,command:AT+CPBS="SM"responseOK- Now you might want to look for the entry at the position index = 7command:Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 33 of 111