12.07.2015 Views

GM862-GPS Software User Guide - SemiconductorStore.com

GM862-GPS Software User Guide - SemiconductorStore.com

GM862-GPS Software User Guide - SemiconductorStore.com

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

<strong>GM862</strong>-<strong>GPS</strong> <strong>Software</strong> <strong>User</strong> <strong>Guide</strong>1vv0300729 Rev. 4 - 24/01/073 Advanced Operations3.1 Accessing the phonebookThe <strong>GM862</strong>-<strong>GPS</strong> can access the phonebook storage of the SIM card inserted, by using specific AT<strong>com</strong>mands it is possible to store and recall phone numbers and their associated name.3.1.1 Preliminary phonebook set upThe <strong>GM862</strong>-<strong>GPS</strong> supports several SIM phonebook storages:• "SM" - SIM phonebookThis is the PB used to store and recall numbers during the normal operation of the device.• "FD" - SIM fixed dialing-phonebook (only phase 2/2+ SIM)This PB has several restrictions; to set it you need the PIN2 code and after having activatedthe FD only the calls to the numbers stored in the FD or their children are allowed, all the othercalls are forbidden.• "LD" - SIM last-dialing-list (+CPBW and +CPBF are not applicable for this storage)This is the list of the last dialed numbers, it is updated automatically at each call originated andinsertion or search on it is not possible, the only operations allowed are recall, read and delete.• "MC" - SIM missed-calls-list (+CPBW and +CPBF are not applicable for this storage)This is the list of the missed calls calling numbers, it is updated automatically at each callmissed and insertion or search on it is not possible, the only operations allowed are recall, readand delete.• "RC" - SIM received-calls-list (+CPBW and +CPBF are not applicable for this storage)This is the list of the received calls calling numbers, it is updated automatically at each callreceived and insertion or search on it is not possible, the only operations allowed are recall,read and delete.In order to access the storage you have to choose which one will be active. This must be the first PBoperation always. Once selected storage, it is not anymore needed to select it again until the desiredstorage remains the one active and the device is not turned off.Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 28 of 111

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!