GM862-GPS Software User Guide - SemiconductorStore.com

GM862-GPS Software User Guide1vv0300729 Rev. 4 - 24/01/07This parameter represents the validity period for the SMS after which the message should bedisregarded instead of being delivered.If in relative format (see VPF parameter) it is an integer:0 to 143 – corresponding to (VP + 1) x 5 minutes144 to 167 – corresponding to 12 hours + ((VP -143) x 30 minutes)168 to 196 – corresponding to (VP - 166) x 1 day197 to 255 – corresponding to (VP - 192) x 1 weekIf in absolute format it is a string in the format:"gg/MM/YY,hh:mm:ss±tz"wheregg day of expiration (2 characters)MM month of expiration (2 characters)YY year of expiration (2 characters)hh hour of expiration (2 characters)mm minute of expiration (2 characters)ss second of expiration (2 characters)± sign of the time zone ( + or - )tz time zone (2 characters)- Protocol Identifier in numerical format:This parameter identifies the protocol used by the receiver entity and informs the SC that theconversion from SMS to that protocol should be done while delivering the message.Protocol ID Conversion towards..0 Implicit (default)33 telex (or teletex reduced to telexformat)34 group 3 telefax35 group 4 telefax36 voice telephone (i.e. conversion tospeech)37 ERMES (European Radio MessagingSystem)38 National Paging system (known to theSC)39 Videotex (T.100/T.101)40 teletex, carrier unspecified41 teletex, in PSPDN42 teletex, in CSPDN43 teletex, in analog PSTN44 teletex, in digital ISDN45 UCI (Universal Computer Interface,ETSI DE/PS 3 01-3)46-47 (reserved, 2 combinations)48 a message handling facility (known tothe SC)49 any public X.400-based messageReproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 62 of 111