GM862-GPS Software User Guide - SemiconductorStore.com

GM862-GPS Software User Guide1vv0300729 Rev. 4 - 24/01/07+CMS ERROR: 42 network congestion Retry later+CMS ERROR: 96 Mandatory information missing Check for destination addressin the SMS, overwrite it andretry.OK command aborted by user you issued a ESC charFor example:1- Let's assume you want to directly send a new SMS to the destination address number+39338123456789. We suppose you already have set up the device for text SMS mode as describedon the previous paragraphs:command:AT+CMGS="+39338123456789"response:>now you can insert the message text in IRA format (note that the IRA format and ASCII formatcoincide for the alphabet characters but not for the other).…. here will be inserted the SMS message text to be sent….conclude text with the character CTRL-Zresponse:+CMGW: 4OKIn this case, the new SMS was successfully sent to the SC and its network reference number is 4.Do not confuse message reference with message index position, the first indicates the networkreference for identifying the sent message (the eventually requested status report will have the samereference) while the second indicates the position where the message has eventually been stored inmemory.Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 72 of 111