GM862-GPS Software User Guide - SemiconductorStore.com

GM862-GPS Software User Guide1vv0300729 Rev. 4 - 24/01/07 - alphanumeric representation of originator/destination number corresponding to theentry found in MT phonebook - PDU length - PDU message(TEXT Mode)+CMT:,,[,,,,,,,] (the information written in italics will be presentdepending on +CSDH last setting)where: - originating address, string type converted in the currently selected character set (see+CSCS) - alphanumeric representation of ; used character set should be the one selectedwith either command +CSCS or @CSCS. - arrival time of the message to the SC, - type of number or :129 - number in national format145 - number in international format (contains the "+") - first octet of GSM 03.40 - Protocol Identifier - Data Coding Scheme - Service Centre address, string type, converted in the currently selected character set(see +CSCS) - text length - TP-User-DataClass 2 messages and messages in the message waiting indication group (stored message)result in indication as defined in =1.3 - Class 3 SMS-DELIVERs are routed directly to TE using unsolicited result codes defined in=2. Messages of other data coding schemes result in indication as defined in =1. - broadcast reporting option0 - Cell Broadcast Messages are not sent to the DTE2 - New Cell Broadcast Messages are sent to the DTE with the unsolicited result code:+CBM: where: - PDU length - message PDU(PDU Mode)(TEXT Mode)+CBM:,,,,where: - message serial number - message ID - Data Coding SchemeReproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 58 of 111