eWON General Reference Guide - Esco Drives & Automation

More documents

Recommendations

Info

General Reference GuideIO Servers ConfigurationATopic NameBItem NameCValueName, DeviceType-DeviceAddressValueNameDevice Type and Address are defined Tag by TagOnly device Type SLC500 is supportedDevice Address is a number between 0..254Topic PLC Address is usedThe Item Name can contain the PLC address where the value is polled, or not. If the address is also specified at the topic level, the addressspecified at Tag level will be ignored.5.6.3.1 Value NameTable 75: DF1 IO server configuration5.6.3.1.1 General DescriptionThe general format of value names for data from SLC-500 controllers matches the naming convention used by the programming software. Theformat is shown below (The parts of the name shown between square brackets are optional).General Value Name Format: X: [file] element [.field] [/bit]X: Identifies the file type. The below table summarizes the valid file types, default file number for each type and the fields allowed.X File Type Default file Number FieldsO Output 0I Input 1S Status 2B Binary 3T Timer 4 .PRE, .ACC, .EN, .TT, .DNC Counter 5 .PRE, .ACC, .CU, .CD, .DN, .OV, .UN, .UAR Control 6 .LEN, .POS, .EN, .DN, .ER, .UL, .IN, .FDN Integer 7F Floating 8A ASCII noneTable 76: value names for DF1 addresses• File: File number must be 0-255 decimal• Element: Element number within the file• Field: Valid only for Counter, Timer and Control files• /bit: Valid for all types except Floating5.6.3.1.2 Output File ItemsOutput File Item Format: O[n]:e.s[/b]• "n" represents the file number and is optional. Value is always zero• "e" indicates the element number in the file (0..30)• "s" indicates the sub-element number (0..255)• "b" specifies the bit (0..15) decimal5.6.3.1.3 Input File ItemsInput File Item Format: I[n]:e.s[/b]• "n" represents the file number and is optional. Value is always one• "e: indicates the element number in the file (0..30)• "s" indicates the sub-element number (0..255)• "b" specifies the bit (0..15) decimalRG-001-0-EN ver 1.5 eWON® - 20/03/2009 - ©ACT'L sa Page 103
General Reference GuideIO Servers Configuration5.6.3.1.4 Status File ItemsStatus File Item Format: S[n]:e[/b]• "n" represents the file number and is optional. If not specified, it is assumed to be 2• "e" indicates the element number in the file (0..255)• "b" specifies the bit (0..15) decimal5.6.3.1.5 Binary File ItemsBinary File Item Format: B[n]:e/b• "n" represents the file number and is optional. If not specified, it is assumed to be 3, otherwise must be between 3 and 255 decimal• "e" indicates the element number in the file (0..255)• "b" specifies the bit (0..15) decimalNote:The format B[n]/b is not supported.5.6.3.1.6 Timer File Items• Timer File Item Format: T[n]: e [.f] [/b]• "n" represents the file number and is optional. If not specified, it is assumed to be 4, otherwise must be between 4 and 255 decimal• "e" indicates the element number (3 words per element) in the file (0..255)• "f" identifies one of the valid values for timer fields specified in the table above. If omitted it is assumed to be the word containing thestatus bits• "b" specifies the bit (0..15) decimal5.6.3.1.7 Counter File ItemsCounter File Item Format: C[n]: e [.f] [/b]• "n" represents the file number and is optional. If not specified, it is assumed to be 5, otherwise must be between 5 and 255 decimal• "e" indicates the element number (3 words per element) in the file (0..255)• "f" identifies one of the valid values for counter fields specified in the table above. If omitted it is assumed to be the word containingthe status bits• "b" specifies the bit (0..15) decimal5.6.3.1.8 Control File ItemsCounter File Item Format: C[n]: e [.f] [/b]• "n" represents the file number and is optional. If not specified, it is assumed to be 6, otherwise must be between 6 and 255 decimal• "e" indicates the element number (3 words per element) in the file (0..255)• "f" identifies one of the valid values for counter fields specified in the table above. If omitted it is assumed to be the word containingthe status bits• "b" specifies the bit (0..15) decimal5.6.3.1.9 Integer File ItemsInteger File Item Format: N[n]:e[/b]• "n" represents the file number and is optional. If not specified, it is assumed to be 7, otherwise must be between 7 and 255 decimal• "e" indicates the element number in the file (0..255)• "b" specifies the bit (0..15) decimal5.6.3.1.10 Floating File ItemsFloating File Item Format: F[n]:e• "n" represents the file number and is optional. If not specified, it is assumed to be 8, otherwise must be between 8 and 255 decimal• "e" indicates the element number in the file (0..255)5.6.3.1.11 ASCII File ItemsASCII File Item Format: An:e[/b]• "n" represents the file number and is not optional• "e" indicates the element number in the file (0...255)• "b" specifies the bit (0..15) decimal5.6.3.1.12 Status registerThe STATUS Tag is a special Tag that returns information about the current state of the communication for a given device. As for other Tags, thestatus Tag ValueName is composed of:RG-001-0-EN ver 1.5 eWON® - 20/03/2009 - ©ACT'L sa Page 104
Page 1 and 2:
eWON Family500, 2001, 4001, 2101, 4
Page 3:
Table of content5.4.3 Tag name conv
Page 6 and 7:
General Reference GuideIntroduction
Page 8 and 9:
General Reference GuideeWON Configu
Page 10 and 11:
Page 12 and 13:
Page 14 and 15:
Page 16 and 17:
Page 18 and 19:
Page 20 and 21:
Page 22 and 23:
Page 24 and 25:
Page 26 and 27:
Page 28 and 29:
Page 30 and 31:
Page 32 and 33:
Page 34 and 35:
Page 36 and 37:
Page 38 and 39:
Page 40 and 41:
Page 42 and 43:
Page 44 and 45:
Page 46 and 47:
Page 48 and 49:
Page 50 and 51:
Page 52 and 53:
Page 54 and 55: General Reference GuideeWON Configu
Page 86 and 87: General Reference GuideIO Servers C
Page 148 and 149: General Reference GuideMonitoring W
Page 154 and 155:
General Reference GuideMonitoring W
Page 156 and 157:
Page 158 and 159:
Page 160 and 161:
Page 162 and 163:
Page 164 and 165:
Page 166 and 167:
General Reference GuideRetrieving d
Page 168 and 169:
General Reference GuideExport Block
Page 170 and 171:
Page 172 and 173:
Page 174 and 175:
Page 176 and 177:
Page 178 and 179:
Page 180 and 181:
Page 182 and 183:
Page 184 and 185:
Page 186 and 187:
Page 188 and 189:
Page 190 and 191:
Page 192 and 193:
Page 194 and 195:
General Reference GuideUpgrading th
Page 196 and 197:
Page 198 and 199:
Page 200 and 201:
General Reference GuideAppendix10 A
Page 202 and 203:
General Reference GuideAppendix10.5
Page 204 and 205:
Page 206:
show all

eWON General Reference Guide - Esco Drives & Automation

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?