eWON General Reference Guide - Esco Drives & Automation

General Reference GuideeWON ConfigurationClear scheduled actionClear pending actionsValidating this checkbox will result in erasing from the sstat.htm file the eWON actions thatare not currently in progress, that means all the actions that are completed (whateversuccessful or not).Note: as sstat.htm is a "virtual" file, which means that its information are stored in the volatilememory from eWON, clearing this file does not impact the memory file system from eWON.As this command is an exception in this page, it has been placed here for obvious ergonomicreasons.Confirm operationPassword requiredYour password is required in order to confirm your changes. Those changes will be validatedwhen you click on the Execute button.3.3.4.5.3 FeaturesFigure 58: Features setup pageThere is some “options/restrictions” available on the firmware. To activate these features, you need to enter an “enable code”.3.3.4.5.4 REBOOTFigure 59: eWON REBOOT Request page from the Storage menuIf for any reason you want to restart your eWON, then you just have to click on the REBOOT button, and the reboot process will begin.Your eWON will be accessible again when restart is completed.For further information on the different ways to reboot the eWON, please refer to chapter “Reboot” on page 15.RG-001-0-EN ver 1.5 eWON® - 20/03/2009 - ©ACT'L sa Page 66