12.07.2015 Views

eWON General Reference Guide - Esco Drives & Automation

eWON General Reference Guide - Esco Drives & Automation

eWON General Reference Guide - Esco Drives & Automation

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>General</strong> <strong>Reference</strong> <strong>Guide</strong>Appendix10.2.2 Non-volatile configurationThere are 2 additional blocks of flash memory used for:• Non-volatile COM configuration: this block contains the "System COM" setup.• Retentive values:Each time a retentive value changes, a record is written in flash, the record is 12 bytes long.This file is also erased when the flash file system is formatted.The flash memory can be erased/written minimum 100K timesEach time a retentive value is written, its record is read back and content is verified, in case of error, error code “Write retentive failed”,code 20517 is generated, it indicates that flash is probably dead.10.3 Tips for Internet setup10.3.1 Finding the IP address of a given hostThe <strong>eWON</strong> does provide DNS (Domain Name Server) resolution. But, sometimes, it’s faster to access Internet nodes by its IP address.In order to find the address corresponding to a given name, you can use the ping –a NodeName command. This command will returnmiscellaneous information including the IP address of NodeName that you need.Example:C:\>ping -a microsoft.comPinging microsoft.com [207.46.197.101] with 32 bytes of data:Destination host unreachable.Destination host unreachable.Destination host unreachable.Destination host unreachable.Ping statistics for 207.46.197.101:Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),Approximate round trip times in milli-seconds:Minimum = 0ms, Maximum = 0ms, Average = 0msThe microsoft.com IP address reported is 207.46.197.101 for this example.10.4 Finding your PC IP addressUnder Windows 95/98, the WINIPCFG command (executed from a command prompt or from the START/RUN menu) will return your Ethernetand PPP adapter IP address. If not currently connected through PPP, the PPP IP address is N/A.WINIPCFG DOS command does not exist anymore on Millennium, Windows NT, 2000 and XP systems.The IPCONFIG command can be used instead. This command must be executed from a command prompt and displays as text the IP address ofall the TCP/IP adapters that are detected.Example:C:\>ipconfigWindows 2000 IP ConfigurationEthernet adapter Local Area Connection:Connection-specific DNS Suffix . :IP Address. . . . . . . . . . . . : 10.0.0.11Subnet Mask . . . . . . . . . . . : 255.255.255.0Default Gateway . . . . . . . . . :RG-001-0-EN ver 1.5 <strong>eWON</strong>® - 20/03/2009 - ©ACT'L sa Page 200

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!