12.07.2015 Views

eWON General Reference Guide - Esco Drives & Automation

eWON General Reference Guide - Esco Drives & Automation

eWON General Reference Guide - Esco Drives & Automation

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>General</strong> <strong>Reference</strong> <strong>Guide</strong>Monitoring Web InterfaceAs the Serial Debug uses <strong>eWON</strong> ressources (CPU and memory), don’t forget to disable the debugging once you don’t need it anymore.Set the SerDebX to 0 (null) to disable it.The buffer used to store data in the real time log is limited to 1000 characters, so if an RX or TX data stream is longer than 450 characters, anerror message saying that it is not possible to log it is logged insteadExample: SER-Rx: Too long to print (800)If the Debug mode is >1 then the ascii values are only logged if there is space, so even if ascii debug is acked, if there is no space, no ascii dataare appended to the hex data.6.7.4.4 Activate VPN debug modeFigure 137: Activate VPN debugThe VPN diagnosis can be set to 3 levels or disabled.6.7.5 ADSL LogIf your ADSL does not work, you may have problems with your configuration. In that case, you can check the ADSL Log, this log is fetched fromthe modem itself and remains in 'English'. It may contain information about an invalid VPI/VCI configuration or an incorrect username andpassword.RG-001-0-EN ver 1.5 <strong>eWON</strong>® - 20/03/2009 - ©ACT'L sa Page 163

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!