12.07.2015 Views

eWON General Reference Guide - Esco Drives & Automation

eWON General Reference Guide - Esco Drives & Automation

eWON General Reference Guide - Esco Drives & Automation

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>General</strong> <strong>Reference</strong> <strong>Guide</strong><strong>eWON</strong> Configuration3.3.4.3.5 RoutingWarning: Depending on your <strong>eWON</strong>'s version (c.f. Table 187 on page 203)This page contains the router configuration of the <strong>eWON</strong>, the PPP settings for the server and client functions of the <strong>eWON</strong> engine, in order todefine the way that you will use your <strong>eWON</strong> to access remote devices, and access them through the <strong>eWON</strong> as if they were on your local site.Figure 45: Routing setup page (on <strong>eWON</strong> VPN : 2005, 4005, 2101, 4101, 2104, 4104)ControlDescriptionSpecial rulesRoute all gateway traffic throughVPNCheck this box if you want to route ALL gateway traffic (expect static routes) through theactive VPN interface.If unchecked, the traffic could take the VPN route or the WAN route (uncrypted).NAT and Transparent ForwardingApply NAT and TF to connectionEnable transparent forwardingHighest transparent forwardingportThis feature enables the Network Address Translation (NAT) and Transparent Forwarding(TF). If the device to reach is on the same LAN as the <strong>eWON</strong>, and if the user has correctlydefined the address IP and the port for this device, then the <strong>eWON</strong> will redirect the packetstowards it. This means that only the packets for the concerned port will be redirected towardsthe selected IP address.You can choose on which interfaces this NAT and TF will be used: VPN, WAN or disable it.If this box is checked, the transparent forwarding feature of the <strong>eWON</strong> is activated (see belowfor Transparent Forwarding definition).Only a range of ports are forwarded transparently.You can control this range, from 0 to 32767 (Default is 10000).The above Ports will be directed to <strong>eWON</strong> itself.Exception: to allow to come back to the <strong>eWON</strong> website, the port 81 (by default) is excludedfrom this range.note: If Network Connection is on ADSL, and you want to allow devices connected to the <strong>eWON</strong>-LAN to go to the Internet, you mustset the Routing to NAT and TF on WAN.RG-001-0-EN ver 1.5 <strong>eWON</strong>® - 20/03/2009 - ©ACT'L sa Page 55

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!