12.07.2015 Views

eWON General Reference Guide - Esco Drives & Automation

eWON General Reference Guide - Esco Drives & Automation

eWON General Reference Guide - Esco Drives & Automation

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

<strong>General</strong> <strong>Reference</strong> <strong>Guide</strong><strong>eWON</strong> Configuration3.3.1.2 Alarms (globals parameters)Figure 11: <strong>eWON</strong> system general setup – AlarmsControlAction retrig intervalTry actionAction retry intervalDescriptionIf an alarm is still present after this interval, then a new action on alarm will be triggered once (only if the alarmcondition is still true AND if the alarm has not been acknowledged yet). The default value for this parameter isone day (86400 seconds).This parameter defines the number of times the action will be retried in case of errors. The value of this numbermust be greater than 1.This parameter defines the interval between two actions attempts if an error occurs. The value for this parametermust be greater than 10.Table 6: global alarms controlsAfter having encoded your parameters, go to the bottom of the page to .3.3.1.3 Date & timeFigure 12: <strong>eWON</strong> system Date & time setupThe <strong>eWON</strong>’s real time clock can be updated manually with this dialog window. Fill in the edit box with date and time and click on .An event will be added to the event log indicating the time update and the time offset between old and new time.Important: Updating the time may result in duplicate points stored in non-chronological order in the <strong>eWON</strong> files (alarms,events and historical).RG-001-0-EN ver 1.5 <strong>eWON</strong>® - 20/03/2009 - ©ACT'L sa Page 14

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!