eWON General Reference Guide - Esco Drives & Automation

General Reference GuideeWON Configuration3.3.4.3.3 Publish IP addressWhen the eWON goes to the Internet (automatically or by CallBack) , it can receive a different IP address at each connection. It needs to informyou of its new WAN address thanks to this publish IP function.Figure 41: Publish IP address configuration pageControlDescriptionPublish by EMailEMail destination addressThis field allows you to define the destination address bydefault that will receive the notification.Publish by dynamic DNSDynamic DNS ProviderChoose your Dynamic DNS provideramong the list besideA Dynamic DNS provider are servicesthat allows you to publish on the Interneta domain name that matches the IPaddress of your PC (fix or dynamic type).Dynamic DNS UsernameDynamic DNS passwordDynamic DNS Host nameDynamic DNS Domain nameDebug connectionPut here your Username.This field allows you to enter a valid password for theDynamic DNS server you want to use.This field allows you to enter a valid host name for theDynamic DNS server that you want to use e.g. myewon.This field allows you to enter a valid domain name for theDynamic DNS server you want to use e.g. no-ip.com.In our example, your eWON will be accessible athttp://myewon.no-ip.comCheck it to record debug info about DynDns negociation inthe “Diagnostic->RealTimeLog” page.You need to to check the Enabled AND select NO-IP as dynamic DNS to access parameters.Otherwise, you will see the page like this:RG-001-0-EN ver 1.5 eWON® - 20/03/2009 - ©ACT'L sa Page 52