eWON General Reference Guide - Esco Drives & Automation

More documents

Recommendations

Info

General Reference GuideeWON ConfigurationControlLog Incoming callLog Outgoing callLog Size (bytes)Append to logLog following connectionsclear log nowDescriptionLogs communications when the eWON is acting as a PPP serverLogs communication when the eWON is acting as PPP Client (connects to a server)Number of bytes allocated for logging PPP communications.When the log is full, logging stops (this does not prevent communication from continuing)Maximum log size is 1MByte (Log Size between 50000 and 100000 are sufficient for debug purpose)Prior to append to log, you must clear log manually using the Clear Log button in the PPP Dumpconfiguration pageThe eWON will log only the N next connections, the number of connections will be decreased each timea new connection is logged. When the last connection has been logged, then the counter will be set to -1(to prevent further connections to be logged).When the value of this counter is 0, then all connections are logged.You can manually set the counter to -1, in order to suspend connection logging, but if you want to releasethe log buffer, then you should disable the Log Incoming call and the Log Outgoing call options.In case you want to log multiple connections, you can choose to Append data to the log or not.Clicking on this button will clear the PPP dump log.Table 16: PPP dump configuration controls3.3.3.4 DebugFigure 22: Debug configuration pageControlDebug COM (1..4)Debug ADSLError DebugDescriptionSet the debug mode of the Serial COM ports (1 to 4 depending of the eWON type).All the debug information will be available in the Real Time Log page (See "Real Time Log" on page 161)Choose between following mode:• No debug:no debug information logged (default)• HEX on RX/TX:Log hexadecimal data received and transmitted• HEX and ASCII on RX/TX: Log hexadecimal and ASCII data received and transmitted• HEX and ASCII (no timeout): Log hexadecimal and ASCII data received and transmitted, withouttimeout information (clearer log)Only available on eWON2104 or eWON4104.Log ADSL trace in the ADSL log page (See "ADSL Log" on page 163)Append hex location data to logged eventsTable 17: Debug configuration controlsRG-001-0-EN ver 1.5 eWON® - 20/03/2009 - ©ACT'L sa Page 25
General Reference GuideeWON Configuration3.3.4 COM Setup sectionWarning: depending on eWON's version (c.f. Table 187 on page 203)The second link of the System setup is the communication setup. All Ethernet, modem and PPP TCP/IPconnectivity parameters are defined here.The tree menu is divided into 4 sub-menus, which classifies the COM setup into functional systems: Interfaces,Network connections, Networking Config and Manage Config.Once totally expanded, the tree menu looks like the one shown on the right.• Important: This COM configuration is not saved in the eWON flash file system, it means that formattingthe eWON will not erase this configuration. This allows formatting the eWON remotely and ensuring thatcommunication is still possible after formatting. Nevertheless, the Default Config menu allows the userto return to default well known communication values.3.3.4.1 Interfaces setupThe Interfaces menu groups the hardware configuration of the means ofcommunications.These interfaces are:• the Modem (optional)• the Ethernet-1-LAN (always present)• the Ethernet-2-WAN (only on eWONx005 & eWONx005CD)• the ADSL (only on eWONx104)Therefore, eWON will show you only the interfaces available on your device.RG-001-0-EN ver 1.5 eWON® - 20/03/2009 - ©ACT'L sa Page 26
Page 1 and 2: eWON Family500, 2001, 4001, 2101, 4
Page 3: Table of content5.4.3 Tag name conv
Page 6 and 7: General Reference GuideIntroduction
Page 8 and 9: General Reference GuideeWON Configu
Page 76 and 77:
General Reference GuideeWON Configu
Page 78 and 79:
Page 80 and 81:
Page 82 and 83:
Page 84 and 85:
Page 86 and 87:
General Reference GuideIO Servers C
Page 88 and 89:
Page 90 and 91:
Page 92 and 93:
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Page 122 and 123:
Page 124 and 125:
Page 126 and 127:
Page 128 and 129:
Page 130 and 131:
Page 132 and 133:
Page 134 and 135:
Page 136 and 137:
Page 138 and 139:
Page 140 and 141:
Page 142 and 143:
Page 144 and 145:
Page 146 and 147:
Page 148 and 149:
General Reference GuideMonitoring W
Page 150 and 151:
Page 152 and 153:
Page 154 and 155:
Page 156 and 157:
Page 158 and 159:
Page 160 and 161:
Page 162 and 163:
Page 164 and 165:
Page 166 and 167:
General Reference GuideRetrieving d
Page 168 and 169:
General Reference GuideExport Block
Page 170 and 171:
Page 172 and 173:
Page 174 and 175:
Page 176 and 177:
Page 178 and 179:
Page 180 and 181:
Page 182 and 183:
Page 184 and 185:
Page 186 and 187:
Page 188 and 189:
Page 190 and 191:
Page 192 and 193:
Page 194 and 195:
General Reference GuideUpgrading th
Page 196 and 197:
Page 198 and 199:
Page 200 and 201:
General Reference GuideAppendix10 A
Page 202 and 203:
General Reference GuideAppendix10.5
Page 204 and 205:
Page 206:
show all

eWON General Reference Guide - Esco Drives & Automation

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?