12.07.2015 Views

eWON General Reference Guide - Esco Drives & Automation

eWON General Reference Guide - Esco Drives & Automation

eWON General Reference Guide - Esco Drives & Automation

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>General</strong> <strong>Reference</strong> <strong>Guide</strong><strong>eWON</strong> ConfigurationWhen using modem port for VCOM, the following must be considered:• Modem serial port is normally owned by PPP:• If an SMS transfer is in progress and a VCOM client tries to connect, the VCOM connection will fail.• If a VCOM client is connected, and an SMS must be sent, the SMS sending will fail.• When an SMS transfer or a VCOM connection ends, the PPP is again the owner of the modem serial port.3.3.2.4 SMTP (mails) setupFigure 16: <strong>eWON</strong> setup SMTP pageControlSMTP server addressSMTP Server portEmail "From" User nameUser namePasswordDescriptionThe IP address of the SMTP server which the Email notification will be sent to. Put SMTP server IP address. Ifyou only know the name of the SMTP server (like smtp.domain.com) see the chapter “Finding the IP address ofa given host” on page 200. Note that it is possible to send mails towards an Exchange server when <strong>eWON</strong> islocated inside an Intranet, providing the IMC (Internet Mail Connector) ad-in is installed on the Exchange Server,and this service is configured to accept incoming mails sent by the <strong>eWON</strong>.Usually the value is 25. In case of doubt, contact your Internet provider or your Network Administrator to check it.The name of the <strong>eWON</strong> Email account. For instance: ewon@compuserve.com. Will appear in the FROM field ofthe message sent.SMTP AUTHENTICATION: insert here the user name. (leave empty if no authentication is required)SMTP AUTHENTICATION: enter here the password. (leave empty if no authentication is required)Table 8: <strong>eWON</strong> SMTP controlsAfter having encoded your parameters, go to the bottom of the page to .3.3.2.5 NTP (time) setupFigure 17: <strong>eWON</strong> NTP setup pageRG-001-0-EN ver 1.5 <strong>eWON</strong>® - 20/03/2009 - ©ACT'L sa Page 19

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!