Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Multi-Unit Wiring (<strong>Apollo</strong> 16)FireWire 800 Host ConnectionCables Required:• One FireWire 800 cable for connecting to the host <strong>com</strong>puter• One FireWire 800 Cable for connecting between the two interfaces• One MADI optical cable for connecting between the two interfaces(single or dual MADI cables can be used)Expander UnitPOWEROUTIN75 OHM TERMONAES/EBU OUTAES/EBU INMON OUT (R) 2 MON OUT (L) 1LINE OUT 9-16LINE IN 9-16PUSHWORD CLOCKFIREWIREMADI OUTOFFMADI INLINE OUT 1-8 LINE IN 1-8UNIVERSAL AUDIO, INC.1394 800 (1) 1394 800 (2)Monitor UnitPOWEROUTIN75 OHM TERMONAES/EBU OUTAES/EBU INMON OUT (R) 2 MON OUT (L) 1LINE OUT 9-16LINE IN 9-16PUSHWORD CLOCKFIREWIREMADI OUTOFFMADI INLINE OUT 1-8 LINE IN 1-8UNIVERSAL AUDIO, INC.1394 800 (1) 1394 800 (2)FireWire 800ComputerConnect speakersand cue outputsto monitor unitKey points for this setup:• The lower <strong>Apollo</strong> 16 is designated as the Monitor (master) unit• The upper <strong>Apollo</strong> 16 is designated the as the Expander (slave) unit• The Monitor unit is connected to the host <strong>com</strong>puter via FireWire 800(either <strong>Apollo</strong> 16 FireWire 800 port can be used for this connection)• The Expander unit is not connected to the host <strong>com</strong>puter• One FireWire 800 cable must be connected between the Expander and Monitor units(either <strong>Apollo</strong> 16 FireWire 800 port can be used for this connection)• One MADI optical cable must be connected from the MADI OUT of theExpander unit to the MADI IN of the Monitor unit• Monitor and cue outputs are connected to the Monitor unit only<strong>Apollo</strong> <strong>Software</strong> <strong>Manual</strong>85Chapter 6: Multi-Unit Cascading
Change language