No320S Owner's Manual - Mark Levinson

Nº 320S Basic Operation7. volume knobAdjusts master volume level. Rotating the volume knobincreases (clockwise) and decreases (counterclockwise) mastervolume level in 1.0dB increments up to 23.0dB and in 0.1dBincrements above 23.0dB. The minimum master volume levelsetting is OFF. The MaxVol parameter can be used to determinethe maximum master volume level setting in 0.1dB incrementsbetween 40.0 and 80.0dB. The factory-default maximummaster volume level is 80.0dB.The Offset parameter can be used to determine individualinput volume level offsets in 0.1dB increments between –20.0and +20.0dB. The factory-default input volume level offset is0.0dB. Whenever an input is selected, the Nº 320S automaticallyapplies the Offset parameter setting to master volume level.Note the following about using the volume knob:• Rotating the volume knob quickly accelerates the rate ofchange to accommodate large adjustments. Rotating thevolume knob too quickly decelerates the rate of change toprevent accidental adjustments that could send dangeroussignal levels to the loudspeakers.• Rotating the volume knob slowly decelerates the rate ofchange to accommodate fine, precise adjustments.2-3Note• The master volume control does not affect record outputlevels.• All Nº 320S volume controls, including master volumeand balance, are deactivated when SSP mode (page 4-8)is activated.8. setup button & LEDOpens and closes the setup menu, which can be used toconfigure the Nº 320S to suit individual preferences andlistening spaces. The front panel setup LED lights red toindicate that the setup menu is open.9. enter buttonSelects and deselects menu items when the setup menu isopen. The enter button performs no function during normaloperating mode.(continued)