No320S Owner's Manual - Mark Levinson

Nº 320S Basic Operation4. stereo record output connectorsProvide left and right-channel analog audio output at fixedlevels. Two single-ended (RCA) connectors labeled 1 and 2 areavailable to output single-ended signals to recording componentssuch as CD-Rs and tape decks.The Rec.Out parameter can be used to assign the record outputconnectors to the desired input(s). It is recommended to usethe Name parameter to associate inputs with the correctrecording components to prevent possible record feedbackloops.NoteNº 320S volume controls, including master volume andbalance, do not affect record output levels.5. & slave in communication portsProvide “links” to compatible Mark Levinson components,allowing the Nº 320S and other linked components to sharecontrols such as display intensity, input naming, standby,playback, input selection, and record. Two 8-pin modularRJ-45 jacks labeled and slave in are available.2-7The communication port can be connected to a MarkLevinson power amplifier that offers Link communicationports. The slave in communication port can be connected toa compatible Mark Levinson digital audio processor or digitaltransport that offers Link communication ports.NoteRefer to Linking (page 2-9) BEFORE linking the Nº 320S toother Mark Levinson components.(continued)