No320S Owner's Manual - Mark Levinson

Nº 320S Basic OperationLinkingLinking is available for all Mark Levinson components that offerLink communication ports, including master, slave in, slave out,and communication ports. These communication ports canbe used to “link” compatible Mark Levinson components in a slavechain, allowing them to share controls such as display intensity,input naming, standby, playback, input selection, and record.The Nº 320S offers two Link communication ports labeled slavein and . The slave in communication port can be connectedto a compatible Mark Levinson digital audio processor or digitaltransport. The communication port can be connected to acompatible Mark Levinson power amplifier.The Nº 320S is compatible with:• All power amplifiers that offer Link or communicationports.• Nº 30, Nº 30.5, and Nº 30.6 Reference Digital Audio Processors• Nº 31 and Nº 31.5 Reference CD Transports• Nº 36, Nº 36S, Nº 360, and Nº 360S Digital Audio Processors• Nº 39 and Nº 390S CD Processors (can be used as either digitalaudio processors or digital transports in a slave chain)• Nº37 CD Transport• Refer to the appropriate documentation for Link compatibilityinformation about other Mark Levinson components.2-9NoteLinking is not available for Mark Levinson digital transportsunless a Mark Levinson digital audio processor is included inthe slave chain.Making Link • DO use Link communication ports, such as master, slave in,Connections slave out, and communication ports. DO NOT useRS-232 ports or other rear panel connectors.• DO use supplied Link communication cables, which areprovided in the Nº 320S accessory carton. Additional Linkcommunication cables are available at authorized MarkLevinson dealers.(continued)