Operation Manual for - Mrclab.com

Ultrasonic milk analyzerFill in the glass with warm (50-60 С) alkaline cleaning solution. Put it in therecess of the analyser and start the command Cleaning from the main menu.After finishing it, pour out the contaminated liquid.4.2.2.3.Rinsing with waterFill in the glass with water. Put it in the recess of the analyser and startcommand Cleaning from the main menu. After finishing it pour out thecontaminated water. Now the device is ready for work.4.2.2.4. Cleaning with acidic solutionIt is recommended to be done every day.Preparation of 1 % acidic solution of Lactoweekly for circulation cleaning inthe milk analyzer:1. Take the package 100 g concentrated powder chemical Lactodaily2. Carefully cut the upper end, paying attention not to spill it.3. In appropriate vessel (for example bucket) pour 1 l water.4. Add the powder and then again water up to 10 l.Fig. 6 Labels for the cleaning chemicalsThe following procedure is executed:1. Rinsing the milk residues:Fill in the glass with water. Put it in the recess of the analyser and startcommand Cleaning from the main menu. After finishing it pour out thecontaminated water.2. Cleaning with acidic solutionFill in the glass with warm (50-60 С) acidic cleaning solution. Put it in therecess of the analyser and start the command Cleaning from the main menu.After finishing it, pour out the contaminated liquid.3. Rinsing with waterFill in the glass with water. Put it in the recess of the analyser and startcommand Cleaning from the main menu. After finishing it pour out thecontaminated water. Now the device is ready for work.Operation manual 21/98