13.07.2015 Views

Operation Manual for - Mrclab.com

Operation Manual for - Mrclab.com

Operation Manual for - Mrclab.com

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Ultrasonic milk analyzerBy using buttons “up”▲ and ”down”▼position on the correspondingcalibration (<strong>for</strong> example Correction 1 – cow) and press Enter.6.3.3.2. Choosing correction parameterAfter choosing calibration mode the display shows the following:Cal1 Correct’sFATSNFDensity------------------------------LactoseSaltsProteinsWater------------------------------ExitUsing the buttons “up”▲ and ”down”▼position on the parameter to becorrected (<strong>for</strong> example FAT) and press the button Enter.6.3.3.3.Making correctionAfter choosing parameter (<strong>for</strong> example fat) the display shows the following:FAT Correction0,05- OK +Using the buttons “up”▲ and ”down”▼is possible to increase or decrease thevalue of the measured parameter in the above pointed limits. Leaving thismode means saving the correction value and activating it.6.3.3.4. Making verificationAfter the corrections are made put the milk analyser in working modefollowing the sequence below:1. Switch off the power supply.2. Switch on the “POWER” switch which starts the identification procedureFor a short time the display shows software versions of the analyzer, <strong>for</strong>example:<strong>Operation</strong> manual 28/98

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!