Operation Manual for - Mrclab.com

Ultrasonic milk analyzermS/cm (18°C)allows sodium and chlorine ions from the blood tobe released into the milk. The concentration ofions in the milk is thereby raised, and it can moreeasily conduct an electrical current - theconductivity of the milk increases.Milk conductivity can be used as tests for degree of water evaporation incondense milk production.Milk conductivity change notifies of powder (dry) milk solution rate.2. Conductivity measurementConductivity measurement is additional possibility of the analyser and isdelivered on customers request/3. Co Meter CalibrServes for conductivity measuring system calibration. Clean the analyzerbefore starting conductivity measurement. (see p. 4.1). You need a standardbuffer with conductivity 5.02[mS/cm] (you may order it for delivery togetherwith the analyser), with temperature 18 o С. After starting this mode, theanalyzer makes preparation for measurement and when it is ready, thefollowing message is displayed:Co Meter CalPut 5.02 buffand press Enterto startThe operator has to put the buffer and to start the measurement. Thefollowing message appears on the display:MeasurementstartedWait pleaseThe buffers' temperature is indicated during measurement. After finishing themeasurement the following message appears on the display:Operation manual 88/98