DX6i Manual - Spektrum

Press the roller to access the SUB TRIM function.GyroThe gyro function offers two selectable gyro gain values that can be selected via the flight mode switch or the gyroswitch. When active the Gyro’s gain channel is plugged into the gear channel/(channel 5).Reduce photo to 13.5%SUB TRIMTHRO 0ELEV 0GYRO 0ListAILE 0RUDD 0PITC 0Accessing the GYRO functionWith the transmitter already powered on and the main screen displayed, press and release the ROLLER toenter the ADJUST LIST.Reduce photo to 13.5%Rotate the roller to highlight the desired channel’s value that you wish to adjust.Press the roller to access the sub trim value.Rotate the roller to adjust the sub trim value.After the desired value is programmed press the roller to deselect the value.ADJUST LISTMODEL SELECTMainTo return to the main screenPress and hold the roller for more than 3 seconds then release the roller and the system will returnto the main screen.Rotate the ROLLER to the right until GYRO is highlighted on screen.To return to the ADJUST LIST screenRotate the roller to highlight LIST then press the roller.Reduce photo to 13.5%ADJUST LISTSUB TRIMGYROTHRO CURMain5114 SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE115