DX6i Manual - Spektrum

Press the roller to access the GYRO screen.Reduce photo to 13.5%Switch location GYRO, F.MODE or INHIf F.MODE is selected the option of choosing either rate that is assigned to NORM or STUNT modes is available.By assigning 0 or 1 to NORM or STUNT, the gain value is automatically selected whenever the Normal or Stuntflight mode is selected.After the desired value or switch is programmed press the roller to deselect the value.GYROIHNListTo return to the main screenPress and hold the roller for more than 3 seconds then release the roller and the system will returnto the main screen.Rotating the roller Highlight INH then press the roller.Rotate the roller to ACT then press the roller to activate the GYRO function.To return to the ADJUST LIST screenRotate the roller to highlight LIST then press the roller.Reduce photo to 13.5%GYRORATE0: 50.0%1: 50.0%SW-GYROListRotate the roller to highlight the desired rate or switch that you wish to adjust.Press the roller to access the selected Rate or Value.Rotate the roller to select switch position values of 0 or 1.116 SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE117