DX6i Manual - Spektrum

To access the COPY FunctionRotate the roller to highlight COPY then press the roller to enter the COPY function.SETUP LIST screenRotate the roller to highlight COPY/RESET then press the roller to access the COPY/RESET function.Copy screenRotate the roller to COPY and select the model memory that you wish to copy by pressing androtating the roller.Reduce photo to 13.5%COPY/RESETMODEL 6 MUSTANGCOPYRESETListTo access the RESET FunctionReduce photo to 13.5%COPY/RESETMODEL 6 MUSTANGCOPYRESETListRotate the roller to highlight RESET then press the roller to enter the RESET function.When the desired model memory is selected, press the roller to highlight YES, next to SURE, and then press theroller to copy the model to the selected memory.RESET screenRotate the roller to YES, next to SURE, and then press the roller to reset the model to factory default settings.Note: Be aware that the model you copy to will have its memory replaced with the new model’smemory, and the programming information for the model to be copied to will be erased.To return to the main screenPress and hold the roller for more than 3 seconds then release the roller and the system will returnto the main screen.To return to the SETUP LISTRotate the roller to highlight LIST in the upper right corner then pressing the roller will return the system to theSETUP LIST screen.Reduce photo to 13.5%RESETMODEL 6 MUSTANGCOPY TO 1SURE? NO/YESListTo Perform a RESETPress the ROLLER and hold while turning on the transmitter to enter the SETUP LIST. When SETUP LIST appearson screen release the roller.Alternatively the setup list can be accessed from the main screen by pressing the roller to access the ADJUST LISTthen scrolling through the ADJUST LIST by rolling the roller to highlight SETUP LIST then press the roller.To return to the main screenPress and hold the roller for more than 3 seconds then release the roller and the system will returnto the main screen.To return to the SETUP LISTRotate the roller to highlight LIST in the upper right corner, then pressing the roller will return the system to theSETUP LIST screen.56 SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE57