DX6i Manual - Spektrum

Press the roller to access the Servo monitor screen.ReverseThe Reverse Switch function provides an electronic means of reversing the servo throw. Servo reversing isavailable for all six channels.THRAILELERUDCH5AUXReduce photo to 13.5%[MONITOR List][ ][ ]◊◊◊◊◊◊To Access the REVERSE functionPress the ROLLER and hold while turning on the transmitter. When SETUP LIST appears on screenrelease the roller.Alternatively the setup list can be accessed from the main screen by pressing the roller to access the ADJUST LIST,then scrolling through the ADJUST LIST by rolling the roller to highlight SETUP LIST, then pressing the roller.To return to the main screenPress and hold the roller for more than 3 seconds then release the roller and the system will returnto the main screen.Reduce photo to 13.5%SETUP LISTMainTo return to the SETUP LISTRotate the roller to highlight LIST in the upper right corner then pressing the roller will return the system to theSETUP LIST screen.MODEL TYPERotate the roller to highlight REVERSE then press the roller to access the REVERSE function.Reduce photo to 13.5%SETUP LISTMONITORREVERSESWASH TYPEMain486 SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE87