DX6i Manual - Spektrum

Alternatively the setup list can be accessed from the main screen by pressing the roller to access the ADJUST LISTthen scrolling through the ADJUST LIST by rolling the roller to highlight SETUP LIST then press the roller.Range CheckRANGE CHECK: When activated the range check screen allows for a range check by using the trainer switch toreduce the output power.Reduce photo to 13.5%TIMERMDL1 BLADE400DOWN TIMER-06:00SWITCH---TRAINERListTo Enter the RANGE Check FunctionPress the ROLLER and hold while turning on the transmitter. When SETUP LIST appears on screenrelease the roller.Alternatively the setup list can be accessed from the main screen by pressing the roller to access the ADJUST LIST,then scrolling through the ADJUST LIST by rolling the roller to highlight SETUP LIST then pressing the roller.Reduce photo to 13.5%Setup List ScreenRotate the roller to highlight TIMER then press the roller to access the Timer function.SETUP LISTMainReduce photo to 13.5%MODEL TYPETIMERMDL1 BLADE400DOWN TIMER-06:00SWITCH---TRAINERListRotate the roller to highlight RANGE CHECK then press the roller to access the RANGE CHECK function.Reduce photo to 13.5%To Program the Timer FunctionRotate the roller to highlight the desired timer function that you wish to change.Up/Down- Selects the up or down timer functionSETUP LISTTIMERRANGE CHECKPOWER SETTINGMain9Time-Switch Options-In minutes or secondsTrainer or Throttle CutWhen the desired function is highlighted press the roller to access the function.Rotate the roller to change the option or value.To return to the main screenPress and hold the roller for more than 3 seconds then release the roller and the system will returnto the main screen.To return to the SETUP LISTRotate the roller to highlight LIST in the upper right corner then pressing the roller will return the system to theSETUP LIST screen.96 SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE97