DX6i Manual - Spektrum

To Program a MODEL NAMERotate the roller to highlight the block below the MODEL # shown on the screen then press the roller.MonitorThe servo monitor screen serves as a useful tool when programming your radio. It displays servo movement anddirection when different programming functions, sticks and/or switches are moved.Reduce photo to 13.5%MODEL NAMEMODEL 1BLADE 400ListTo access the monitorPress the ROLLER and hold while turning on the transmitter to enter the SETUP LIST. When SETUP LIST appearson screen release the roller.Alternatively the setup list can be accessed from the main screen by pressing the roller to access the ADJUST LIST,then scrolling through the ADJUST LIST by rolling the roller to highlight SETUP LIST, then pressing the roller.Rotate the roller to select the desired position that you wish to assign a letter or number to then press the roller toaccess the numbers or letter characters.Rotate the roller to scroll through the letters/ numbers and when the desired number is selected pressing the rollerwill assign it to the selected position.Repeat this process to complete the model name then highlight OK! when finished.Reduce photo to 13.5%SETUP LISTMODEL TYPEMainTo return to the main screenPress and hold the roller for more than 3 seconds then release the roller and the system will returnto the main screen.Rotate the ROLLER to the right until SERVO is highlighted on screen.To return to the SETUP LISTRotate the roller to highlight LIST in the upper right corner then pressing the roller will return the system tothe SETUP LIST screen.Reduce photo to 13.5%SETUP LISTMainMODEL NAMEMONITOR 3REVERSE84 SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE85