DX6i Manual - Spektrum

Rotate the roller to highlight IHN then press the roller. Now rotate the roller to select AILE, ELEV, RUDD or FMFLIGHT MODE.TimerThe DX6i features an on screen timer with two programming options:To return to the main screenReduce photo to 13.5%D/R COMBID/R SW:INHListPress and hold the roller for more than 3 seconds then release the roller and the system will returnto the main screen.To return to the main screenPress and hold the roller for more than 3 seconds then release the roller and the system will returnto the main screen.To return to the SETUP LISTRotate the roller to highlight LIST in the upper right corner then pressing the roller will return the system to theSETUP LIST screen.Note: If INH is selected the aileron, elevator and rudder dual rate and expo functions independentlyoperate using their respective switches.Down-Timer:Down Timer - The countdown timer allows a preset time in ten-second intervals up to 59 minutes and 50 secondsto be programmed, and when that time expires, a beeper will sound five (5) beeps every five (5) seconds.Up-Timer:Up Timer - The up timer function is a simple count-up timer that displays minutes and seconds up to 59minutes and 59 seconds. The start time can be programmed. In most cases the default start setting of 00:00 isrecommended.When the DOWN-TIMER or UP-TIMER function is selected, the timer will be displayed on the main screen. Thefollowing buttons are used in conjunction to operate the timer function:Trainer Timer button- when programmed Used to stop start and reset the timer.Throttle Cut button- when programmed Used to start stop and reset the timer.Note: To reset the timer press and hold the assigned timer switch (throttle cut or trainer) for morethan 3 seconds.To select the Timer functionPress the ROLLER and hold while turning on the transmitter. When SETUP LIST appears on screenrelease the roller.Reduce photo to 13.5%SETUP LISTD/R&COMBITIMERRANGE CHECKMain894 SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE95