DX6i Manual - Spektrum

Trim Include FunctionBoth mixes offer a trim feature that, when activated, cause the master channel’s trim to also affect the slave channel.To Program the Trim Include FunctionRotate the roller to highlight TRIM.DifferentialNote: Only available when Flaperon or Elevon is activated (see Wing Tail Mix Page 43).The Differential Aileron function allows precise electronic adjustments of the up vs. down aileron travel of bothailerons. Aileron differential is used to reduce unwanted yaw characteristics during roll inputs. In order to accessthe Differential Function, flaperon or elevon wing mixing must be selected and two servos must be used to operatethe ailerons. Note the Differential range is from 0% to + 100%.Reduce photo to 13.5%MIX 1ListTHRO≥ THRO ACTRATE D 0% U 0%SW AIL D/R TRIM ACTTo Access the Differential Aileron Mixing FunctionWith the transmitter already powered on and the main screen displayed, press and release the ROLLER toenter the ADJUST LIST.Reduce photo to 13.5%Press the roller to access the trim function.Rotate the roller to select ACT (activate) or INH (inhibit).After the trim function is programmed press the roller to deselect the value.ADJUST LISTMODEL SELECTMainTo return to the main screenPress and hold the roller for more than 3 seconds then release the roller and the system will returnto the main screen.Rotate the ROLLER to the right until DIFFERENTIAL is highlighted on screen.To return to the ADJUST LIST screenRotate the roller to highlight LIST then press the roller.Reduce photo to 13.5%ADJUST LISTMIX 2DIFFERENTIALSETUP LISTMain874 SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE75