DX6i Manual - Spektrum

To Enter the SETUP ListPress the ROLLER and hold while turning on the transmitter. When SETUP LIST appears on screen,release the roller.Model Type FunctionThe DX6i features two programming types: Airplane and Helicopter. The DX6i can memorize data for up to 10models individually and the model type will automatically be stored with each model memory.Reduce photo to 13.5%To Enter the MODEL TYPE functionPress the ROLLER and hold while turning on the transmitter. When SETUP LIST appears on screen,release the roller.SETUP LISTMODEL TYPEMainAlternatively the setup list can be accessed from the main screen by pressing the roller to access the ADJUST LISTthen scrolling through the ADJUST LIST by rolling the roller to highlight SETUP LIST, then press the roller.MODEL TYPE appears on the lower section of the screen.Alternatively the setup list can be accessed from the main screen by pressing the roller to access the ADJUST LISTthen scrolling through the ADJUST LIST by rolling the roller to highlight SETUP LIST, then press the roller and theSETUP LIST will appear.Reduce photo to 13.5%SETUP LISTMainTo Exit the SETUP LISTPress and hold the roller for more than 3 seconds then release the roller and the system will returnto the main screen.Alternatively rotating the roller to highlight MAIN in the upper right corner then pressing the roller will return thesystem to the main screen.Turning the transmitter off then back on will return the transmitter to the main screen.MODEL TYPERotate the roller to highlight MODEL TYPE then press then roller to access the MODEL TYPE function.Reduce photo to 13.5%SETUP LISTMODEL TYPEMain180 SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE81