UM10139

Philips SemiconductorsVolume 1UM10139Chapter 11: I 2 C interfaces3. Write 0x08 to I2CONCLR to clear the SI flag.4. Set up Slave Transmit mode data buffer.5. Increment Slave Transmit buffer pointer.6. Exit11.9.34 State: 0xB8Data has been transmitted, ACK has been received. Data will be transmitted, ACK bit willbe received.1. Load I2DAT from Slave Transmit buffer with data byte.2. Write 0x04 to I2CONSET to set the AA bit.3. Write 0x08 to I2CONCLR to clear the SI flag.4. Increment Slave Transmit buffer pointer.5. Exit11.9.35 State: 0xC0Data has been transmitted, NOT ACK has been received. Not addressed Slave mode isentered.1. Write 0x04 to I2CONSET to set the AA bit.2. Write 0x08 to I2CONCLR to clear the SI flag.3. Exit.11.9.36 State: 0xC8The last data byte has been transmitted, ACK has been received. Not addressed Slavemode is entered.1. Write 0x04 to I2CONSET to set the AA bit.2. Write 0x08 to I2CONCLR to clear the SI flag.3. Exit© Koninklijke Philips Electronics N.V. 2005. All rights reserved.User manual Rev. 01 — 15 August 2005 170