PHASE II REPORT - Caltrans

9.0 REPORT
Report the following:
9.1 Mixing Torque, N-cm
9.2 Mixing Time, minutes
9.3 Spread Time, minutes
9.4 Maximum Torque, N-cm
9.5 Breaking Time, minutes
9.6 If the mixture mixes beyond 10 minutes without increasing in torque or breaking, note
results as greater than 10.
9.7 Blot Test results.
10.0 PRECISION AND BIAS
Additional studies are required. The equipment is still open for further development.
11.0 BLOT TEST
11.1 General Information
The Blot Test is the second step for evaluating the mix proportions determined and tested using
the hand mixing method, ISSA TB-113. The Blot Test results indicate several conditions of the
mix that represent break.
11.2 Terminology
11.2.1 Definitions:
101