PHASE II REPORT - Caltrans

Figure 4.8: Mix M4 with Large Anchor Stirrer and Large Stainless Steel Bowl
For the standard propeller and small stainless steel bowl configuration, and using a stirrer speed
of 50 rpm, the mixing was improved. A close-up of the standard propeller and small stainless
steel bowl is shown in Figure 4.9. A homogeneous state was achieved for the mix. An increase
in torque with time was also the result of the configuration and is shown in Figure 4.10.
Figure 4.9: AMT Standard Propeller and Small Stainless Steel Bowl Close Up
47