Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
CEL#: 10-17749 LAB #: Date Tested: Mar-08 M5: Ruggedness Evaluation # 4<br />
Project Name: Slurry/Micro Mix Design Tested By: LH 1)apply tack coat to disc and break emulsion<br />
Aggregate: Type 3 Emulsion: MSE MICRO 2)record weight of specimen after cure, before soaking<br />
CAT: COHESION ABRASION TEST (FRENCH WTAT): SHORT TERM<br />
MIX 5<br />
Source: TEXAS Source: ERGON 3)cover test specimen with water<br />
Emulsion mid-range target: 10.0 4)abrade for time below<br />
Pre-wet water mid-range target: 8.0 5)rinse debris with 1000ml of water<br />
Additive mid-range target: 0.5 Additive: cement type 2 6)carefully pat dry with towel<br />
Additive mid-range target: 0.00 Additive: Aluminum sulfate 7)record weight after test<br />
Additive mid-range target: Additive:<br />
Additive mid-range target: Additive:<br />
Curing Conditions:<br />
Cohes.Abrasion w/wheels Control Eval#4<br />
% material weights,g Temperature,°C 25 23 °C<br />
-- aggregate 1350.0 agg Temperature,°F 77 73.4 °F<br />
0.5 cement / lime 6.8 cement<br />
Other: ___________ Humidity, % 50 40<br />
139<br />
NONE<br />
8.0 water 108.0 water<br />
0.0 Aluminum sulfate 0.0 Aluminum sulfate Soaking period before testing see below<br />
10.0 emulsion (target) 135.0 emulsion<br />
Other: ___________ Compaction w/ roller immediately before testing<br />
A Cure Start Initial Initial End Final Final Soaking Abrasion Temp B C=A-B<br />
Original Time Clock Temp<br />
Humidity Clock Temp Humidity Period time of SOAK Final Loss<br />
Wt, g minutes Time °F °C Time before test water Wt, g Wt, g<br />
1633.2 65 10:20 73.2 22.9 40 11:25 23 40 65 sec 65 sec 30 1259.2 374.0<br />
1632.3 65 10:35 73.4 23.0 40 11:40 23 40 65 sec 65 sec 30 1277.8 354.5<br />
1635.1 65 10:55 73.8 23.2 40 12:00 23 40 65 sec 65 sec 30 1250 385.1<br />
Temp of test water: 30 °C<br />
86 °F
Change language