USER’S MANUAL
Omron SX inverter manual
Omron SX inverter manual
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
6. Put the cable interface plate in place and secure<br />
with the fixing screws.<br />
SX-D4160-EV (V) to SX-D4800-EV and SX-<br />
D6200-EV(690V) to SX-D61K0-EV<br />
3.4 Cable specifications<br />
Table 7 Cable specifications<br />
Cable<br />
Cable specification<br />
Mains<br />
Motor<br />
Control<br />
Power cable suitable for fixed installation for the<br />
voltage used.<br />
Symmetrical three conductor cable with concentric<br />
protection (PE) wire or a four conductor cable<br />
with compact low-impedance concentric shield<br />
for the voltage used.<br />
Control cable with low-impedance shield,<br />
screened.<br />
3.5 Stripping lengths<br />
Fig. 19 indicates the recommended stripping lengths<br />
for motor and mains cables.<br />
Table 8<br />
Stripping lengths for mains and motor cables<br />
Model<br />
Mains cable<br />
a<br />
(mm)<br />
b<br />
(mm)<br />
a<br />
(mm)<br />
Motor cable<br />
b<br />
(mm)<br />
c<br />
(mm)<br />
SX-D4090-EV 160 16 160 16 41<br />
SX-D4110-EV to<br />
SX-D4132-EV<br />
SX-D6090-EV to<br />
SX-D6160-EV<br />
170 24 170 24 46<br />
L1 L2 L3 PE PE U V W<br />
Mains<br />
Motor<br />
Fig. 19 Stripping lengths for cables<br />
(06-F45-cables only)<br />
Fig. 18 Connecting motor and mains cables<br />
VSD models SX-D4160-EV to SX-D4800-EV and SX-<br />
D6200-EV to SX-D61K0-EV are supplied with Klockner<br />
Moeller K3x240/4 power clamps.<br />
For all type of wires to be connected the stripping<br />
length should be 32 mm.<br />
3.5.1 Dimension of cables and<br />
fuses<br />
Please refer to the chapter Technical data, section<br />
14.6, page 174.<br />
20 Installation Omron SX inverter manual
Change language